{"product_id":"value-collection-01167584-no-58-hss-jobber-drill-bit","title":"Value Collection 01167584 No 58 Hss Jobber Drill Bit","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION 01167584 is a No. 58 wire-size jobber-length drill bit machined from high speed steel (HSS) with a bright, uncoated finish. It carries a 118-degree standard point angle and a right-hand cutting direction, making it a general-purpose drilling tool suited for light-duty precision work. The bit measures 1.625 inches overall length with an 0.6875-inch flute length, and the decimal diameter is 0.0420 inches. A tapered web with web thinning reduces thrust and helps the point self-center on entry. Two regular spiral flutes clear chips efficiently during through-hole operations.\u003c\/p\u003e\n\u003cp\u003eThis bit is sized for small-diameter work in aluminum, non-ferrous metals, and similar soft materials. Typical applications include pilot holes, locating holes, and precision through-holes in sheet stock, tubing, and machined components. The straight cylindrical shank seats in standard drill chucks, collets, and CNC tool holders that accept the 0.0420-inch shank diameter. Machinists, maintenance technicians, and fabricators reach for this size when working on small fastener clearances, wire routing holes, or instrument panels where tight dimensional tolerances are required.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eNo. 58 wire size at 0.0420 inches decimal diameter for tight-tolerance small-hole work\u003c\/li\u003e\n  \u003cli\u003e118-degree standard point angle with web-thinned, tapered web for reduced entry thrust\u003c\/li\u003e\n  \u003cli\u003eHigh speed steel construction provides adequate hardness for aluminum and non-ferrous workpieces\u003c\/li\u003e\n  \u003cli\u003eBright uncoated finish maintains close diameter tolerances straight from the manufacturer grind\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut with regular spiral flutes for consistent chip evacuation\u003c\/li\u003e\n  \u003cli\u003eStraight cylindrical shank compatible with standard chucks and collets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a general-purpose jobber drill bit for use in handheld drills, benchtop drill presses, and CNC machining centers equipped with chucks or collets that accept a 0.0420-inch straight shank. Primary workpiece material rating covers aluminum and non-ferrous metals.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eA licensed machinist or qualified maintenance technician should secure the shank fully in the chuck or collet before operation and verify runout before drilling at speed. Ensure the workpiece is clamped or fixtured to prevent movement during the cut. At this diameter, use a center punch or spotting drill to establish a starting point and prevent bit walk. Do not apply excessive feed pressure, as small-diameter HSS bits are susceptible to breakage if deflected or forced.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Size (Wire)\u003c\/strong\u003e: No. 58\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Size (Decimal Inch)\u003c\/strong\u003e: 0.0420 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 0.6875 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.625 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.0420 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Regular Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High Speed Steel (HSS)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered, Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Aluminum and Non-Ferrous\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGrade\u003c\/strong\u003e: General Purpose\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.05 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 01167584\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51718095700274,"sku":"01167584","price":30.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/1dab656f99a879bb0fb77d9b22735fb0.jpg?v=1788549510","url":"https:\/\/voomisupply.com\/products\/value-collection-01167584-no-58-hss-jobber-drill-bit","provider":"Voomi Supply","version":"1.0","type":"link"}