{"product_id":"value-collection-01166107-letter-j-hss-jobber-drill-bit","title":"Value Collection 01166107 Letter J Hss Jobber Drill Bit","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION 01166107 is a Letter J jobber-length drill bit manufactured from high speed steel (HSS) with a bright, uncoated finish. It carries a 0.2770-inch cutting diameter, a standard 118-degree point angle, and a web-thinned, tapered web configuration that reduces thrust on entry. The regular spiral flute geometry evacuates chips efficiently, and the right-hand cutting direction is compatible with all standard drill press and hand-drill chucks. At 4.125 inches overall length with a 2.875-inch flute length, this bit fits the jobber-length class used across general-purpose metal fabrication and maintenance work. Installation is performed by any trade professional performing layout, drilling, or fabrication tasks.\u003c\/p\u003e\n\u003cp\u003eThis bit is rated for general-purpose drilling applications with a primary workpiece material classification of aluminum and non-ferrous metals. It suits residential and commercial maintenance, light fabrication, HVAC sheet metal work, plumbing rough-in drilling, and electrical panel or conduit layout work. The straight cylindrical shank seats directly into standard three-jaw chucks without requiring a reduction sleeve or adapter, making it a practical addition to any service technician's drill index.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eLetter J size with 0.2770-inch decimal diameter for precise hole sizing\u003c\/li\u003e\n  \u003cli\u003e118-degree standard point angle for general-purpose entry into non-ferrous materials\u003c\/li\u003e\n  \u003cli\u003eWeb-thinned, tapered web reduces drilling thrust and improves bit stability on entry\u003c\/li\u003e\n  \u003cli\u003eRegular spiral flute design promotes consistent chip evacuation\u003c\/li\u003e\n  \u003cli\u003eBright uncoated HSS construction — resharpenable and compatible with standard grinding equipment\u003c\/li\u003e\n  \u003cli\u003eStraight cylindrical shank fits all standard drill chucks without adapters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a general-purpose jobber-length drill bit compatible with standard three-jaw drill chucks on corded or cordless drills and drill presses that accept a 0.2770-inch straight shank.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eSecure the shank firmly in the chuck and verify concentricity before drilling. Use appropriate cutting fluid or lubrication when drilling non-ferrous metals to extend bit life and improve hole finish. Allow the bit to reach full speed before contacting the workpiece, and back off periodically on deep holes to clear chips from the flute. Replace or resharpen the bit when point geometry shows wear to avoid overheating or workpiece damage.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Size (Letter)\u003c\/strong\u003e: J\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Size (Decimal Inch)\u003c\/strong\u003e: 0.2770 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4.125 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 2.875 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.2770 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Regular Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High Speed Steel (HSS)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Aluminum and Non-Ferrous\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Grade\u003c\/strong\u003e: General Purpose\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.077 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 01166107\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51693327876402,"sku":"01166107","price":38.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/d6a2ba3220622404bdd317382ac6359d.jpg?v=1788310700","url":"https:\/\/voomisupply.com\/products\/value-collection-01166107-letter-j-hss-jobber-drill-bit","provider":"Voomi Supply","version":"1.0","type":"link"}