{"product_id":"us-motors-d1p3b-three-phase-ac-motor-odp-1-hp-145t","title":"Us Motors D1P3B Three Phase Ac Motor Odp 1 Hp 145T","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe US MOTORS D1P3B is a three-phase, premium-efficient AC motor with an open drip-proof (ODP) enclosure, designed for industrial and commercial drive applications. Rated at 1 horsepower and 1165 RPM at 60 Hz, it runs on a 145T steel frame with a rigid mount configuration. Ball bearings support the shaft, and Class F insulation protects the windings against heat buildup during continuous operation. Full-load efficiency is rated at 82.50 percent with a service factor of 1.15, giving it modest overload capacity. Licensed electricians and millwrights typically handle installation in motor-driven equipment such as pumps, fans, compressors, and conveyors.\u003c\/p\u003e\n\u003cp\u003eThe D1P3B is suited for three-phase power applications in light industrial, commercial HVAC, and process equipment settings. Its 1165 RPM nameplate speed makes it appropriate for lower-speed drive loads where reduced output shaft speed is needed without an external speed reducer. The rigid mount base allows direct bolt-down to equipment frames or motor mounts. With a single operating speed and no built-in thermal protection, this motor is intended for use in systems that provide their own overload and thermal protection devices per applicable electrical codes.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e1 HP three-phase premium-efficient motor rated at 1165 nameplate RPM\u003c\/li\u003e\n  \u003cli\u003eODP enclosure suitable for indoor and sheltered outdoor installations with adequate airflow\u003c\/li\u003e\n  \u003cli\u003e145T steel frame with rigid mount for direct equipment mounting\u003c\/li\u003e\n  \u003cli\u003eBall bearing construction for reliable radial and axial load handling\u003c\/li\u003e\n  \u003cli\u003eClass F insulation rated for elevated winding temperatures\u003c\/li\u003e\n  \u003cli\u003e1.15 service factor allows short-duration overload operation above nameplate rating\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or new-installation three-phase AC motor for equipment requiring a 145T frame, rigid mount, 1 HP, 1165 RPM motor with an ODP enclosure. Cross-references Dayton part number 5N301.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a licensed electrician in accordance with the National Electrical Code (NEC) and any applicable local codes. Disconnect and lock out all power sources before mounting or wiring the motor. Verify that the supply voltage, phase configuration, and amperage capacity of the circuit match the motor nameplate data before energizing. Because this motor has no built-in thermal protection, an appropriately sized external overload relay or motor protection device must be installed in the circuit.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHorsepower\u003c\/strong\u003e: 1 HP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMotor Type\u003c\/strong\u003e: Three Phase Premium Efficient\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNameplate RPM\u003c\/strong\u003e: 1165\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency\u003c\/strong\u003e: 60 Hz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFull Load Amperage\u003c\/strong\u003e: 4\/2 amps\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFull Load Efficiency\u003c\/strong\u003e: 82.50 percent\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eService Factor\u003c\/strong\u003e: 1.15\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnclosure Style\u003c\/strong\u003e: ODP (Open Drip-Proof)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrame Size\u003c\/strong\u003e: 145T\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMount Style\u003c\/strong\u003e: Rigid\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBearing Type\u003c\/strong\u003e: Ball\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsulation Class\u003c\/strong\u003e: F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrame Material\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShaft Diameter x Length\u003c\/strong\u003e: 7\/8 inches x 2-1\/4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 14.09 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAmbient Operating Temperature\u003c\/strong\u003e: 40 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Speeds\u003c\/strong\u003e: 1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThermal Protection\u003c\/strong\u003e: None\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 40 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: US MOTORS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: D1P3B\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"US MOTORS","offers":[{"title":"Default Title","offer_id":51540634632498,"sku":"D1P3B","price":456.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/eae6b2aef39eb4976f0230aa7fb784e4.jpg?v=1785860612","url":"https:\/\/voomisupply.com\/products\/us-motors-d1p3b-three-phase-ac-motor-odp-1-hp-145t","provider":"Voomi Supply","version":"1.0","type":"link"}