{"product_id":"urell-59896341-circulator-pump-1-25-hp-115v-3-speed-hydronic","title":"Urell 59896341 Circulator Pump 1\/25 Hp 115V 3-speed Hydronic","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe URELL 59896341 is a three-speed, wet-rotor in-line circulator pump rated at 1\/25 HP and 115 volts, 60 Hz, single phase, drawing 0.75 amps at 87 watts. Built with an ASTM Grade 30 cast iron casing and a closed polyethersulfone composite impeller, it delivers flow rates from 0 to 17 GPM against a discharge head of 58 decimeters. The ceramic face shaft seal and aluminum oxide ceramic shaft are designed for long-term, maintenance-free operation in closed hydronic systems. A licensed HVAC technician or plumber typically handles installation. The pump ships with a line cord and aquastat and features a built-in timer and integral check valve.\u003c\/p\u003e\u003cp\u003eThis pump is suited for residential and light commercial applications including boiler and hydronic heating, radiant floor heating, hydronic fan-coil systems, ground-source heat pumps, solar heating, and heat recovery systems. It is rated for liquid temperatures from 36 to 230 degrees F in a closed system and carries a working pressure rating of 145 psi. The GF 15\/26 flanged end connections on both inlet and outlet make it a straightforward drop-in replacement in compatible piping configurations.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eThree-speed permanent split capacitor motor at 2450 RPM with whisper-quiet operation\u003c\/li\u003e\n\u003cli\u003eIntegral check valve prevents backflow without a separate fitting\u003c\/li\u003e\n\u003cli\u003eBuilt-in timer and aquastat included for direct system control\u003c\/li\u003e\n\u003cli\u003eClosed impeller design in polyethersulfone composite for reliable hydraulic performance\u003c\/li\u003e\n\u003cli\u003eWet rotor design eliminates the need for external lubrication or routine maintenance\u003c\/li\u003e\n\u003cli\u003eMeets ANSI\/NSF 61, CSA, CUL, ETL, UL (Canada and US) standards\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in boiler and hydronic heating systems, radiant floor heating, ground-source heat pumps, solar heating, and heat recovery applications in residential or light commercial installations with GF 15\/26 flanged piping connections.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a licensed HVAC technician or plumber in accordance with applicable local codes. Shut off power to the system and isolate the loop before removing or installing the pump. The pump must be installed in a closed system within the rated temperature and pressure limits. Do not run the pump dry, as the wet rotor depends on system fluid for bearing lubrication and cooling.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Rating\u003c\/strong\u003e: 1\/25 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Supply\u003c\/strong\u003e: 87 watts at 115 volts, 60 Hz, 1 phase, 0.75 amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Type\u003c\/strong\u003e: Permanent Split Capacitor, 2 Pole\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeeds\u003c\/strong\u003e: 3-speed, 2450 RPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow Rate\u003c\/strong\u003e: 0 to 17 GPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDischarge Head\u003c\/strong\u003e: 58 decimeters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure Rating\u003c\/strong\u003e: 145 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Rating\u003c\/strong\u003e: 36 to 230 degrees F (closed system)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Connection\u003c\/strong\u003e: GF 15\/26 Flanged x GF 15\/26 Flanged\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Dimensions\u003c\/strong\u003e: 5.25 inches Length x 6.5 inches Height\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCasing Material\u003c\/strong\u003e: ASTM Grade 30 Cast Iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpeller Material\u003c\/strong\u003e: Polyethersulfone Composite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpeller Design\u003c\/strong\u003e: Closed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft Material\u003c\/strong\u003e: Aluminum Oxide Ceramic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft Seal\u003c\/strong\u003e: Ceramic Face\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStator Housing Material\u003c\/strong\u003e: Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eO-Ring Material\u003c\/strong\u003e: EPDM Rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotor Can Material\u003c\/strong\u003e: Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump Type\u003c\/strong\u003e: Wet Rotor, In-Line\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications\u003c\/strong\u003e: ANSI\/NSF 61, CSA, CUL, ETL, UL (Canada and US)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty\u003c\/strong\u003e: 36 Month Limited from Date of Manufacture\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: URELL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 59896341\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"URELL","offers":[{"title":"Default Title","offer_id":51268850090290,"sku":"59896341","price":197.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/308913876.jpg?v=1780707529","url":"https:\/\/voomisupply.com\/products\/urell-59896341-circulator-pump-1-25-hp-115v-3-speed-hydronic","provider":"Voomi Supply","version":"1.0","type":"link"}