{"product_id":"uponor-f1022000-pex-tubing-2-inch-300-ft-white","title":"Uponor f1022000 Pex Tubing 2 Inch 300 Ft White","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe UPONOR f1022000 is a 2-inch nominal, white AquaPEX cross-linked polyethylene tubing supplied in a 300-foot coil. With an inside diameter of 1.629 inches and an outside diameter of 2.125 inches, this tubing is engineered for hydronic heating systems and potable water distribution in residential and commercial construction. It carries a temperature rating of 73.4 to 200 degrees F and a working pressure range of 80 to 160 psi depending on operating temperature. Manufactured to ASTM F876 and F877 and CSA B137.5, it is certified to NSF Standards 14 and 61, confirming suitability for contact with potable water. The PEX 5106 designation exceeds ASTM F876 chlorine-resistance requirements for continuous-recirculation systems up to 140 degrees F.\u003c\/p\u003e\n\u003cp\u003eThis tubing is used in closed-loop hydronic heating systems, radiant floor installations, and large-diameter domestic water distribution where a 2-inch run is required. It is appropriate for hydronic applications where the system contains no ferrous corrodible components, or where any ferrous components are fully isolated from the tubing. The 300-foot coil length reduces field joints on long runs, making it efficient for commercial mechanical rooms, large residential installs, and underground service lines when properly sleeved. Licensed plumbers and mechanical contractors are the primary installers of this product size.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eManufactured and listed to ASTM F876, ASTM F877, and CSA B137.5 for consistent dimensional and performance compliance\u003c\/li\u003e\n  \u003cli\u003eCertified to NSF Standards 14 and 61, confirming potable water safety\u003c\/li\u003e\n  \u003cli\u003ePEX 5106 designation exceeds chlorine-resistance requirements for continuous-recirculation systems up to 140 degrees F\u003c\/li\u003e\n  \u003cli\u003eRated for 200 degrees F at 80 psi and 73.4 degrees F at 160 psi, covering a broad range of hydronic operating conditions\u003c\/li\u003e\n  \u003cli\u003e30-day UV-resistance level provides a handling window during construction before covering or burial\u003c\/li\u003e\n  \u003cli\u003e300-foot coil minimizes field joints on long distribution runs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eSuitable for hydronic heating applications where the system contains no ferrous corrodible components, or where ferrous components are fully isolated from the tubing. Compatible with standard PEX expansion and crimp fittings sized for 2-inch nominal tubing. Not intended for systems with direct ferrous metal contact without proper isolation.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a licensed plumber or mechanical contractor in accordance with applicable local plumbing codes and IFGC or IPC requirements. Shut off and depressurize the system before cutting or connecting tubing. Use only fittings and tools rated and sized for 2-inch PEX to maintain pressure integrity at rated conditions. Limit UV exposure to the 30-day rated window; cover or protect tubing promptly after installation in exposed locations.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNominal Size\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 1.629 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutside Diameter\u003c\/strong\u003e: 2.125 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 300 feet (coil)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTemperature Rating\u003c\/strong\u003e: 73.4 to 200 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWorking Pressure\u003c\/strong\u003e: 80 to 160 psi\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: PEX (cross-linked polyethylene)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: White\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ASTM F876, ASTM F877, CSA B137.5\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCertifications\u003c\/strong\u003e: NSF 14, NSF 61, PEX 5106 chlorine-resistance designation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: UPONOR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: f1022000\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"UPONOR","offers":[{"title":"Default Title","offer_id":51268081385778,"sku":"F1022000","price":3410.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/Uponor_F1021250.jpg?v=1780698598","url":"https:\/\/voomisupply.com\/products\/uponor-f1022000-pex-tubing-2-inch-300-ft-white","provider":"Voomi Supply","version":"1.0","type":"link"}