{"product_id":"tungaloy-6863115-replaceable-drill-tip-20mm-ah725-dmp200","title":"Tungaloy 6863115 Replaceable Drill Tip 20mm AH725 DMP200","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe TUNGALOY 6863115 is a replaceable drill tip designed for use in the Drill Meister modular drilling system. Built from solid carbide with a TiAlN coating and manufactured in grade AH725, this tip delivers consistent cutting performance across a wide range of workpiece materials. The DMP200 insert geometry and 140-degree drill point angle are optimized for controlled chip formation and accurate hole entry. At 20.00 mm (0.7870 inches) in cutting diameter, this tip suits production drilling applications where repeatable accuracy and fast tip changes are priorities. It is installed and serviced by machinists and tool-room technicians in CNC and manual drilling setups.\u003c\/p\u003e\u003cp\u003eThis drill tip is intended for use in Drill Meister series modular drill bodies that accept the DMP200 insert geometry with an insert seat size of 20. Primary workpiece material compatibility covers steel, stainless steel, cast iron, superalloys, and titanium, corresponding to ISO material codes P, M, K, and S. It is suited for both low-volume precision work and high-cycle production environments where indexable tip replacement reduces downtime compared to regrinding solid drills.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSolid carbide construction with TiAlN coating for wear and heat resistance\u003c\/li\u003e\n\u003cli\u003eAH725 manufacturer grade optimized for steel, stainless steel, cast iron, and superalloys\/titanium\u003c\/li\u003e\n\u003cli\u003e140-degree drill point angle for accurate entry and reduced thrust force\u003c\/li\u003e\n\u003cli\u003eDMP200 insert geometry in 20 mm cutting diameter (0.7870 inches)\u003c\/li\u003e\n\u003cli\u003eReplaceable tip design enables fast changeover without removing the drill body from the machine\u003c\/li\u003e\n\u003cli\u003eManufactured to AS 9100, ISO 14001, and ISO 9001:2008 standards\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use with Drill Meister series modular drill bodies accepting DMP200 insert geometry and insert seat size 20.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is performed by qualified machinists or tooling technicians. Power down and lock out the machine spindle before removing or seating the drill tip. Use the correct torque tool and seating procedure specified by TUNGALOY for Drill Meister tips to ensure proper clamping and runout. Inspect the insert pocket for debris or damage before installing a new tip.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 0.7870 inches \/ 20.00 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: TiAlN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: AH725\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Geometry\u003c\/strong\u003e: DMP200\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Drill Meister\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Seat Size\u003c\/strong\u003e: 20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 140 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Steel, Stainless Steel, Cast Iron, Superalloys, Titanium (ISO codes P, M, K, S)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.071 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: AS 9100, ISO 14001, ISO 9001:2008\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23291502\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: TUNGALOY\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 6863115\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TUNGALOY","offers":[{"title":"Default Title","offer_id":51974180995378,"sku":"6863115","price":181.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/d31d106d473d8d5306c3336f754d5639_aba76311-2f95-4f3e-bf5b-b2a472cd6ad9.jpg?v=1789976222","url":"https:\/\/voomisupply.com\/products\/tungaloy-6863115-replaceable-drill-tip-20mm-ah725-dmp200","provider":"Voomi Supply","version":"1.0","type":"link"}