{"product_id":"tungaloy-6804829-cutoff-insert-jcgn200f-th10-2mm","title":"Tungaloy 6804829 Cutoff Insert JCGN200F TH10 2mm","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe TUNGALOY 6804829 is a solid carbide cutoff insert designed for parting and grooving operations on CNC lathes and turning centers. Manufactured to the JCGN200F geometry with a TH10 grade designation, this uncoated insert delivers a 2 mm cutting width and a neutral lead angle for straight, radial cut-off passes. The F chipbreaker geometry promotes controlled chip formation, reducing the risk of chip packing in the groove. At 0.005 pounds, the insert seats into a clamp-style toolholder and is suited for high-precision applications where consistent groove width and low deflection are critical. Machinists and CNC operators working with non-ferrous metals and superalloys will find this insert well-matched to their requirements.\u003c\/p\u003e\n\u003cp\u003eThis insert is intended for cut-off and parting applications on turning equipment. Primary workpiece materials are non-ferrous metals and superalloys, with secondary suitability for cast iron and steel. The JCGN style and J-Series designation indicate compatibility with corresponding TUNGALOY clamp-style toolholders designed for the JCGN insert form. Typical applications include bar stock parting, groove profiling, and face grooving on production lathes in both shop and production environments.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction, TH10 grade, uncoated  -  suited for non-ferrous metals and superalloys\u003c\/li\u003e\n  \u003cli\u003e2 mm cutting width (0.0787 inches) for precise, narrow parting cuts\u003c\/li\u003e\n  \u003cli\u003eNeutral lead angle for straight radial cut-off without axial force bias\u003c\/li\u003e\n  \u003cli\u003eF chipbreaker geometry for reliable chip control in the groove\u003c\/li\u003e\n  \u003cli\u003eClamp-style insert holding method for secure, repeatable seating\u003c\/li\u003e\n  \u003cli\u003eJ-Series designation  -  matches TUNGALOY J-Series clamp toolholder system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with TUNGALOY J-Series clamp-style toolholders accepting the JCGN insert style. Primary workpiece materials are non-ferrous metals (material code N) and superalloys (material code S). Secondary workpiece materials include cast iron (code K) and steel (code P). Material grades C2 and C3 apply.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist or CNC tooling technician with the machine powered down and in a locked-out state before any insert change. Seat the insert fully into the toolholder pocket and verify clamp engagement before resuming operation. Inspect the insert seating surface and clamp for wear or debris that could affect insert position. Follow the toolholder manufacturer's clamping procedure  -  do not overtighten the clamp screw beyond the toolholder specification.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: JCGN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Size Code\u003c\/strong\u003e: 200\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: TH10\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Width\u003c\/strong\u003e: 2.00 mm (0.0787 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Height\u003c\/strong\u003e: 3.00 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 20.00 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Height\u003c\/strong\u003e: 0.1180 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.05 mm (0.0020 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLead Angle\u003c\/strong\u003e: 0 degrees, Neutral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Clamp\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: J-Series\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Non-Ferrous Metal, Superalloy\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSecondary Workpiece Material\u003c\/strong\u003e: Cast Iron, Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: C2, C3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.005 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: TUNGALOY\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 6804829\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TUNGALOY","offers":[{"title":"Default Title","offer_id":52077278331186,"sku":"6804829","price":321.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/50349ba97cde7d621e91d8c381c24f4e_2f9c1c76-b98f-400c-b5e0-543b61569811.jpg?v=1790053214","url":"https:\/\/voomisupply.com\/products\/tungaloy-6804829-cutoff-insert-jcgn200f-th10-2mm","provider":"Voomi Supply","version":"1.0","type":"link"}