{"product_id":"tru-maxx-szmfw7240-mounted-flap-wheel-240-grit-2in","title":"Tru-maxx SZMFW7240 Mounted Flap Wheel 240 Grit 2in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe TRU-MAXX SZMFW7240 is a shank-mounted flap wheel designed for precision surface finishing, blending, and deburring on metal, wood, and composite materials. Built with aluminum oxide abrasive on a coated construction, this wheel delivers consistent cut at a very fine 240 grit rating. The 1\/4-inch shank mounts directly into die grinders, drill presses, or flexible shaft machines. With a maximum operating speed of 25,000 RPM, it handles high-speed finishing tasks without sacrificing control. Machinists, tool and die technicians, and fabricators reach for this wheel when fine surface prep or light material removal is required in tight or contoured areas.\u003c\/p\u003e\n\u003cp\u003eThis mounted flap wheel is suited for bench, portable, and stationary rotary tool setups commonly found in fabrication shops, maintenance facilities, and production environments. Its 2-inch diameter and 1-inch face width make it well matched for inside-diameter finishing, slot blending, and contour work on small to mid-size parts. The coated aluminum oxide construction handles ferrous and non-ferrous metals, as well as hardwoods and some plastics. It is sold individually and sized for single-use or light-production applications.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e240 grit very fine grade aluminum oxide abrasive for finish-quality surface blending and deburring\u003c\/li\u003e\n  \u003cli\u003eCoated abrasive construction provides consistent cut rate across the full face width\u003c\/li\u003e\n  \u003cli\u003e1\/4-inch shank diameter fits standard die grinders, rotary tools, and drill chucks\u003c\/li\u003e\n  \u003cli\u003e25,000 RPM maximum rated speed suitable for high-speed rotary tools\u003c\/li\u003e\n  \u003cli\u003e2-inch outside diameter with 1-inch face width for contoured and inside-diameter work\u003c\/li\u003e\n  \u003cli\u003eNo interleaf design for direct abrasive contact and controlled material removal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a direct-mount replacement or standard flap wheel for any rotary tool or die grinder equipped with a 1\/4-inch collet or chuck, rated at or above 25,000 RPM maximum operating speed.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by inserting the 1\/4-inch shank fully into the collet or chuck of the host tool and tightening securely before operation. Always verify the tool spindle speed does not exceed the 25,000 RPM maximum rating marked on this wheel. Wear appropriate eye protection and ensure workpiece is secured before engaging the wheel. Inspect the wheel for damage before each use and discard immediately if cracks, tears, or excessive wear are present.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAbrasive Material\u003c\/strong\u003e: Aluminum Oxide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAbrasive Type\u003c\/strong\u003e: Coated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGrit\u003c\/strong\u003e: 240\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGrade\u003c\/strong\u003e: Very Fine\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutside Diameter\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFace Width\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMount Type\u003c\/strong\u003e: Shank\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum RPM\u003c\/strong\u003e: 25,000\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInterleaf\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Dimensions\u003c\/strong\u003e: 2.25 inches H x 2 inches W x 1 inch L\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.115 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 31191600\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: TRU-MAXX\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: SZMFW7240\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TRU-MAXX","offers":[{"title":"Default Title","offer_id":51747474604338,"sku":"SZMFW7240","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/f84be55413c758e4d1a4ccf76218ac15.jpg?v=1788880955","url":"https:\/\/voomisupply.com\/products\/tru-maxx-szmfw7240-mounted-flap-wheel-240-grit-2in","provider":"Voomi Supply","version":"1.0","type":"link"}