{"product_id":"tool-flo-96501616-internal-threading-toolholder-1x1-in","title":"Tool-flo 96501616 Internal Threading Toolholder 1x1 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe TOOL-FLO 96501616 is an indexable internal threading toolholder designed for precision thread cutting and grooving in bore applications. Built on the Flo-Lock series platform, this right-hand holder accepts FL 3L inserts secured by a clamp-style insert holding method. The shank measures 1 x 1 inch with an overall length of 12 inches, giving machinists adequate reach for deep-bore work. A minimum bore diameter of 1.375 inches defines the smallest bore this toolholder can service. Coolant-through capability supports chip evacuation and thermal control during continuous threading cycles. This tool is handled and installed by CNC machinists and tool-room technicians in production or job-shop environments.\u003c\/p\u003e\n\u003cp\u003eThe 96501616 is suited for internal threading and grooving operations on lathes and turning centers where a right-hand, straight-shank toolholder is required. The Flo-Lock series is engineered for rigid insert clamping, making it appropriate for both light finishing passes and heavier threading cycles in ferrous and non-ferrous materials. The multi-use designation means this holder handles both threading and grooving insert geometries within compatible FL 3L insert families, reducing the number of dedicated holders needed at a turret station.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eInternal thread cutting and grooving capability in a single toolholder\u003c\/li\u003e\n  \u003cli\u003eRight-hand orientation with a 1 x 1 inch square shank\u003c\/li\u003e\n  \u003cli\u003eFlo-Lock series clamp-style insert retention for rigid, repeatable insert seating\u003c\/li\u003e\n  \u003cli\u003eCoolant-through design for improved chip flow and tool-tip cooling\u003c\/li\u003e\n  \u003cli\u003e12 inch overall length provides extended reach into deep bores\u003c\/li\u003e\n  \u003cli\u003eCenter to cutting edge dimension of 0.688 inches supports precise bore centerline alignment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with FL 3L series inserts. Compatible with CNC lathes and turning centers that accept a 1 x 1 inch square-shank internal toolholder. Toolholder style is A16.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and tool changes should be performed by a qualified machinist with the machine in a full stop, spindle-off condition and all energy sources locked out per shop LOTO procedures. Confirm insert seating and clamp torque against the toolholder manufacturer specifications before initiating a cut. Verify bore clearance against the 1.375 inch minimum bore diameter before mounting. Coolant-through lines should be connected and flow confirmed prior to running threading cycles to prevent premature insert wear.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Type\u003c\/strong\u003e: Internal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHand of Holder\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eToolholder Style\u003c\/strong\u003e: A16\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Flo-Lock\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Compatibility\u003c\/strong\u003e: FL 3L\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Clamp\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Width\/Diameter\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Height\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 12 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Bore Diameter\u003c\/strong\u003e: 1.375 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCenter to Cutting Edge\u003c\/strong\u003e: 0.688 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Tool Application\u003c\/strong\u003e: Grooving and Threading\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMulti-use Tool\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 2.66 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: TOOL-FLO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 96501616\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TOOL-FLO","offers":[{"title":"Default Title","offer_id":67918210269490,"sku":"96501616","price":363.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/b304544b7bfdc0005a12627fad4afba6.jpg?v=1791268291","url":"https:\/\/voomisupply.com\/products\/tool-flo-96501616-internal-threading-toolholder-1x1-in","provider":"Voomi Supply","version":"1.0","type":"link"}