{"product_id":"titan-usa-te82721-square-end-mill-0-5in-2-flute-cobalt","title":"Titan Usa TE82721 Square End Mill 0.5in 2 Flute Cobalt","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe TITAN USA TE82721 is a cobalt square end mill designed for milling ferrous and tough alloy materials in machining center and manual mill applications. Built from M42 cobalt high-speed steel, it delivers heat and wear resistance that standard HSS tooling cannot match. The 0.5-inch diameter cutter runs a 30-degree helix angle with an upcut, right-hand flute geometry, producing clean chip evacuation and efficient cutting action. With a 1-inch length of cut and 3-inch overall length on a 0.5-inch straight shank, this end mill suits a wide range of slotting, profiling, and peripheral milling operations. The bright uncoated finish means it is ready to run as delivered. Machinists and toolroom technicians are the primary users.\u003c\/p\u003e\u003cp\u003eThis end mill is suited for use in vertical milling machines, CNC machining centers, and manual knee mills where a 0.5-inch shank collet or end mill holder is available. Its 2-flute, center-cutting design allows direct plunge entry as well as standard side milling. The 30-degree helix promotes smooth cutting in stainless steel, tool steel, and other high-strength alloys commonly encountered in job shop and production environments. It is equally applicable to roughing passes in softer materials where a 2-flute tool provides superior chip clearance.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eM42 cobalt HSS construction for elevated heat resistance and longer tool life in tough alloys\u003c\/li\u003e\n\u003cli\u003e30-degree helix angle with upcut right-hand flute geometry for efficient chip evacuation\u003c\/li\u003e\n\u003cli\u003eCenter-cutting capable — supports direct plunge entry without a pre-drilled hole\u003c\/li\u003e\n\u003cli\u003eBright uncoated finish — no coating buildup to affect dimensional tolerances\u003c\/li\u003e\n\u003cli\u003e2-flute design provides maximum chip clearance in slotting and deep-pocket operations\u003c\/li\u003e\n\u003cli\u003eRight-hand cut with straight 0.5-inch shank for standard collet and end mill holder compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a standard 0.5-inch shank square end mill compatible with any milling machine or machining center equipped with an ER, R8, or Cat\/BT toolholder accepting a 0.5-inch end mill or collet.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is performed by qualified machinists or toolroom technicians. Ensure the spindle is fully stopped and the machine is powered down before inserting or removing the end mill from the holder. Secure the shank to the manufacturer-specified torque range for the holder type in use. Inspect the shank and collet bore for chips or damage before tightening to avoid runout that can shorten tool life.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Cobalt (M42 HSS)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Upcut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating \/ Finish\u003c\/strong\u003e: Bright \/ Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.15 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: TITAN USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: TE82721\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TITAN USA","offers":[{"title":"Default Title","offer_id":51728289497394,"sku":"TE82721","price":61.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/5007390985a7f2c8c3c3fd920d782b7d_93a0cbde-13bd-4fca-9a06-c6c9177b85cc.jpg?v=1788690275","url":"https:\/\/voomisupply.com\/products\/titan-usa-te82721-square-end-mill-0-5in-2-flute-cobalt","provider":"Voomi Supply","version":"1.0","type":"link"}