{"product_id":"titan-usa-tc90524-square-end-mill-0-375in-4-flute-solid-carbide","title":"Titan Usa TC90524 Square End Mill 0.375in 4 Flute Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe TITAN USA TC90524 is a 4-flute solid carbide square end mill designed for precision milling operations in metalworking and machining applications. Built from micrograin solid carbide, it delivers the rigidity and edge retention needed for demanding cuts. The tool features a 30-degree helix angle and a TiCN coating, which improves surface hardness and reduces friction during cutting. With a 0.375-inch diameter and 1-inch length of cut, this end mill is suited for slotting, profiling, and peripheral milling. It is centercutting, allowing plunge entry into the workpiece. Licensed machinists and CNC operators typically specify this tool for ferrous and non-ferrous material removal.\u003c\/p\u003e\n\u003cp\u003eThis end mill is intended for use in vertical machining centers, CNC mills, and manual knee mills where a standard 3\/8-inch shank is accepted. The right-hand cut, right-hand flute, upcut geometry promotes efficient chip evacuation and is well matched to conventional and climb milling passes. The 2.5-inch overall length keeps the tool compact, reducing deflection risk at typical milling depths. It is a single-end tool sold individually and is appropriate for production-floor and job-shop environments alike.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eMicrograin solid carbide construction for superior hardness and wear resistance\u003c\/li\u003e\n  \u003cli\u003eTiCN coating reduces friction and extends tool life in ferrous and non-ferrous cuts\u003c\/li\u003e\n  \u003cli\u003e4-flute geometry balances material removal rate with surface finish quality\u003c\/li\u003e\n  \u003cli\u003e30-degree helix angle with upcut flute direction for efficient chip evacuation\u003c\/li\u003e\n  \u003cli\u003eCentercutting design allows direct plunge entry without pre-drilling\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut and right-hand flute for standard spindle compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in machining centers and milling machines accepting a 3\/8-inch straight shank tool holder, including standard ER collet chucks and end mill holders of the appropriate bore size.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eTool installation should be performed by a qualified machinist with the spindle fully stopped and the machine in a locked-out, tagged-out state per applicable shop safety procedures. Insert the shank to the recommended engagement depth in the collet or holder before torquing the retention mechanism. Inspect the cutting edges for chips or damage before mounting. Verify spindle speed and feed rate against published carbide tooling parameters for the workpiece material before initiating a cut.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.375 inches (3\/8 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide (Micrograin)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.375 inches (3\/8 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: TiCN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Upcut\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Index\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.13 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: TITAN USA\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: TC90524\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TITAN USA","offers":[{"title":"Default Title","offer_id":51735256006962,"sku":"TC90524","price":53.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/620047457e07449297384acbd90c264b_596aa2bf-a6cc-4c05-a294-12c6d4e33c10.jpg?v=1788771054","url":"https:\/\/voomisupply.com\/products\/titan-usa-tc90524-square-end-mill-0-375in-4-flute-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}