{"product_id":"titan-usa-tc58232-square-end-mill-0-032-in-4-flute-carbide","title":"Titan Usa TC58232 Square End Mill 0.032 in 4 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe TITAN USA TC58232 is a solid carbide square end mill designed for precision milling operations requiring tight tolerances and a sharp, flat-bottom finish. Measuring 0.0320 inches in cutting diameter with a 0.096 inch length of cut, this miniature end mill is built for fine detail work in ferrous and nonferrous materials. The micrograin carbide substrate and AlTiN coating deliver heat resistance and edge retention at elevated cutting speeds. With a 30-degree helix angle and four upcut flutes, it evacuates chips efficiently while maintaining surface finish quality. Licensed machinists and CNC programmers working in tool-and-die, mold making, and precision part production will find this tool suited to their finishing and semi-finishing passes.\u003c\/p\u003e\n\u003cp\u003eThis end mill is suited for use in vertical machining centers, CNC routers, and manual mills where a 0.125 inch (1\/8 inch) straight shank is accepted. Its 1.5 inch overall length keeps deflection low in short-reach applications. The centercutting geometry allows plunge entry as well as conventional peripheral cutting. Typical applications include slot milling, profiling, and contouring in hardened steels, stainless steel, titanium, and high-temp alloys where the AlTiN coating provides thermal protection.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e0.0320 inch cutting diameter for fine detail and tight-tolerance milling\u003c\/li\u003e\n  \u003cli\u003eAlTiN coating for high heat resistance and extended tool life in hard materials\u003c\/li\u003e\n  \u003cli\u003eMicrograin solid carbide substrate for rigidity and edge sharpness\u003c\/li\u003e\n  \u003cli\u003e4-flute, 30-degree upcut helix for efficient chip evacuation and surface finish\u003c\/li\u003e\n  \u003cli\u003eCentercutting design allows direct plunge entry into workpiece\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut, right-hand flute configuration for standard spindle use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in CNC machining centers and manual mills accepting a 0.125 inch (1\/8 inch) round shank collet or end mill holder.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist or CNC operator. Ensure the spindle is fully stopped and the machine is in a safe, locked-out state before changing tooling. Seat the shank fully into the collet or holder to the recommended minimum engagement depth to prevent pullout under cutting loads. Verify runout with a dial indicator before initiating a cutting program, particularly given the small diameter of this tool where even minor runout accelerates wear and increases breakage risk.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 0.0320 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.096 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.125 inches (1\/8 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Upcut\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: Micrograin\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Index\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.02 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: TITAN USA\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: TC58232\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TITAN USA","offers":[{"title":"Default Title","offer_id":51727184363826,"sku":"TC58232","price":38.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/34904dae94065b032382969dff7d4aaa.jpg?v=1788674440","url":"https:\/\/voomisupply.com\/products\/titan-usa-tc58232-square-end-mill-0-032-in-4-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}