{"product_id":"titan-usa-tc58216-square-end-mill-0-016-in-4-flute-carbide","title":"Titan Usa TC58216 Square End Mill 0.016 in 4 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe TITAN USA TC58216 is a solid carbide square end mill designed for high-precision milling in demanding machining environments. With a 0.0160-inch cutting diameter and four flutes, this micro end mill delivers clean, accurate cuts in hard and abrasive materials. The AlTiN coating provides heat resistance and extended tool life at elevated cutting speeds. A 30-degree helix angle supports efficient chip evacuation, and the upcut flute geometry pulls chips away from the workpiece. Right-hand cut and right-hand flute direction are standard. This tool is suited for CNC machinists and toolroom operators working in tight tolerances on small-feature components.\u003c\/p\u003e\n\u003cp\u003eThe TC58216 is used in precision CNC milling operations where small-diameter tooling is required. Typical applications include micro-slot milling, detail contouring, and fine-feature machining on hardened steels, stainless, titanium, and other difficult-to-machine alloys. The 0.125-inch shank diameter fits standard 1\/8-inch collets, and the 1.5-inch overall length suits low-profile workholding setups. It is center-cutting, allowing direct plunge entry where needed. This tool is intended for use by experienced CNC operators and machinists running appropriate feeds and speeds for the workpiece material.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e0.0160-inch (0.4 mm) cutting diameter for micro-feature machining\u003c\/li\u003e\n  \u003cli\u003eSolid micrograin carbide substrate for rigidity and wear resistance\u003c\/li\u003e\n  \u003cli\u003eAlTiN coating for thermal resistance and extended tool life in hard materials\u003c\/li\u003e\n  \u003cli\u003e4-flute, upcut geometry with 30-degree helix for efficient chip evacuation\u003c\/li\u003e\n  \u003cli\u003eCenter-cutting design allows direct plunge entry\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut with right-hand flute direction — standard CNC spindle compatible\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in CNC machining centers and manual mills equipped with 1\/8-inch collet or collet chuck toolholding. Suitable for milling hardened steels, stainless steel, titanium, and similar hard or abrasive workpiece materials where AlTiN-coated carbide tooling is appropriate.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified CNC operator or machinist. Seat the shank fully into the collet or toolholder and torque to the toolholder manufacturer's specification before running. Verify runout with a dial indicator before cutting — micro-diameter end mills are sensitive to even small amounts of runout. Always confirm appropriate feeds, speeds, and depth of cut for the workpiece material before engaging the cut.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.0160 inches (0.4 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.048 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.125 inches (1\/8 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.5 inches (1-1\/2 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Upcut\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCenter Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: Micrograin\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Index\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.02 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: TITAN USA\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: TC58216\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TITAN USA","offers":[{"title":"Default Title","offer_id":51728660431154,"sku":"TC58216","price":46.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/34904dae94065b032382969dff7d4aaa_6d7a4a88-a178-4dab-91e4-19bc54f337cc.jpg?v=1788694578","url":"https:\/\/voomisupply.com\/products\/titan-usa-tc58216-square-end-mill-0-016-in-4-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}