{"product_id":"titan-usa-tc25835-square-end-mill-3-16-in-5-flute-carbide","title":"Titan Usa TC25835 Square End Mill 3\/16 in 5 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe TITAN USA TC25835 is a 5-flute solid carbide square end mill designed for high-performance milling in demanding shop environments. With a 3\/16-inch cutting diameter and a 9\/16-inch length of cut, this single-end tool handles slotting, profiling, and finishing passes in ferrous and non-ferrous materials. The AlCrO-MAX coating provides thermal resistance and wear protection at elevated cutting speeds. A 38-degree right-hand helix promotes efficient chip evacuation while reducing cutting forces. The micrograin carbide substrate supports sharp edges and long tool life. Machinists, tool-and-die shops, and precision job shops are the primary users of this end mill.\u003c\/p\u003e\n\u003cp\u003eThis end mill is suited for general-purpose and high-speed machining operations in CNC machining centers and manual knee mills. The variable index geometry helps reduce harmonic chatter during full-slot and peripheral milling passes. The 3\/16-inch shank diameter matches the cutting diameter for direct installation in standard collet chucks or end mill holders without a reduction bushing. Applications include milling steel alloys, stainless steel, cast iron, and hard plastics where a fine-finish edge profile is required.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e5-flute geometry increases feed rate capability and improves surface finish compared to 4-flute designs\u003c\/li\u003e\n  \u003cli\u003eAlCrO-MAX coating delivers oxidation resistance and extended tool life at high cutting temperatures\u003c\/li\u003e\n  \u003cli\u003e38-degree right-hand helix angle promotes upcut chip flow and reduces re-cutting of chips\u003c\/li\u003e\n  \u003cli\u003eVariable index flute spacing reduces chatter and vibration during aggressive cuts\u003c\/li\u003e\n  \u003cli\u003eMicrograin solid carbide substrate maintains edge sharpness across a wide range of workpiece materials\u003c\/li\u003e\n  \u003cli\u003eCenter-cutting design allows direct plunge entry into workpiece material\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a direct-fit replacement end mill for standard 3\/16-inch collet chucks, ER collet systems, and end mill holders used in CNC and manual milling machines. No specific OEM model compatibility was stated in the product data.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist following shop safety procedures. Ensure the spindle is fully stopped and the machine is powered down before changing tooling. Insert the shank fully into the collet or holder to the recommended engagement depth and torque the collet nut per the toolholder manufacturer specification. Inspect the cutting edges for chips or damage before each use and replace the tool if edge deterioration is observed.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 3\/16 inches (0.1875 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 9\/16 inches (0.5625 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3\/16 inches (0.1875 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 5\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 38 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide, Micrograin\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlCrO-MAX\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Upcut\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Index\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCenter Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single End\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Dimensions\u003c\/strong\u003e: 2.8 inches L x 0.5 inches W x 0.5 inches H\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.03 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112803\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: TITAN USA\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: TC25835\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TITAN USA","offers":[{"title":"Default Title","offer_id":51728714137906,"sku":"TC25835","price":44.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/d27bc9552a3a40c8375b7e4048a1e590_2f283b55-9b71-4a70-bc92-c67cb05817af.jpg?v=1788695390","url":"https:\/\/voomisupply.com\/products\/titan-usa-tc25835-square-end-mill-3-16-in-5-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}