{"product_id":"titan-usa-tc14908-square-end-mill-1-8-in-4-flute-altin","title":"Titan Usa TC14908 Square End Mill 1\/8 in 4 Flute Altin","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe TITAN USA TC14908 is a double-end, four-flute square end mill designed for high-performance milling in demanding machining environments. Built from micrograin solid carbide and finished with an AlTiN (Aluminum Titanium Nitride) coating, this tool handles hardened steels, stainless, and heat-resistant alloys where standard coatings fall short. The 1\/8 inch diameter and 1\/4 inch length of cut make it well-suited for fine detail work, slotting, and profiling in tight geometries. A 30-degree helix angle promotes chip evacuation and reduces cutting forces. Installed and operated by machinists and tool-and-die professionals, the TC14908 fits standard 1\/8 inch collets and tool holders.\u003c\/p\u003e\n\u003cp\u003eThis end mill is appropriate for CNC machining centers and manual mills requiring a small-diameter, short-cutting-length tool. The double-end configuration extends tool life by providing two usable cutting ends. Right-hand cut and right-hand flute direction are standard for conventional CNC setups. The centercutting geometry allows plunge cuts as well as peripheral and slot milling. Typical applications include mold work, prototype machining, and precision component production where tight tolerances and surface finish are critical.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eMicrograin solid carbide substrate for rigidity and wear resistance\u003c\/li\u003e\n  \u003cli\u003eAlTiN coating extends tool life in high-heat, high-hardness applications\u003c\/li\u003e\n  \u003cli\u003eDouble-end design provides two cutting ends per tool\u003c\/li\u003e\n  \u003cli\u003e30-degree helix angle promotes efficient chip evacuation\u003c\/li\u003e\n  \u003cli\u003eCentercutting geometry allows direct plunge entry\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut and right-hand flute direction for standard CNC compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in CNC machining centers and manual mills equipped with 1\/8 inch collets or tool holders accepting a 1\/8 inch shank diameter.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist following proper toolholding procedures. Ensure the machine spindle is fully stopped and locked out before inserting or removing the tool. Seat the shank fully into the collet or chuck to the recommended engagement depth and torque the retention mechanism per the toolholder manufacturer specification. Verify runout with a dial indicator before beginning a cut, as excessive runout on a 1\/8 inch diameter tool accelerates wear and increases breakage risk.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 1\/8 inch (0.1250 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1\/4 inch (0.25 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1-1\/2 inches (1.5 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1\/8 inch (0.125 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: Micrograin\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Upcut\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDouble End\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112803\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: TITAN USA\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: TC14908\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TITAN USA","offers":[{"title":"Default Title","offer_id":51732413350194,"sku":"TC14908","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/4d8d1f2122dcd90ff53c1721ab24f6fe_199a354a-e0d1-4b20-a3dd-4bf5fa99c2cb.jpg?v=1788742532","url":"https:\/\/voomisupply.com\/products\/titan-usa-tc14908-square-end-mill-1-8-in-4-flute-altin","provider":"Voomi Supply","version":"1.0","type":"link"}