{"product_id":"titan-usa-tc10527-square-end-mill-4-flute-solid-carbide","title":"Titan Usa TC10527 Square End Mill 4 Flute Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe TITAN USA TC10527 is a solid carbide square end mill designed for precision milling operations in metal fabrication and machining environments. With a 0.4219-inch cutting diameter and a 1-inch length of cut, this tool handles slotting, profiling, and peripheral milling in a single setup. The 30-degree helix angle promotes efficient chip evacuation and smooth cutting action. The micrograin carbide substrate provides the hardness and wear resistance required for demanding ferrous and non-ferrous cutting applications. This end mill is installed and operated by machinists and CNC technicians working with vertical or horizontal milling machines and machining centers.\u003c\/p\u003e\u003cp\u003eThis end mill suits general-purpose milling tasks in job shops, production machining, and tool-and-die work. The 7\/16-inch shank diameter fits standard collet chucks and end mill holders used in most CNC machining centers and manual knee mills. The 2.75-inch overall length provides adequate reach for common cavity and shoulder milling scenarios without sacrificing rigidity. The bright, uncoated finish makes it well suited for non-ferrous metals, plastics, and general steel applications where coating is not required.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSolid micrograin carbide construction for extended tool life and edge integrity\u003c\/li\u003e\n\u003cli\u003e0.4219-inch (27\/64) cutting diameter with 1-inch length of cut\u003c\/li\u003e\n\u003cli\u003e4 flutes with 30-degree right-hand upcut helix for efficient chip removal\u003c\/li\u003e\n\u003cli\u003eRight-hand cut, center-cutting capable — supports plunge entry\u003c\/li\u003e\n\u003cli\u003eBright\/uncoated finish suitable for non-ferrous metals, plastics, and general steels\u003c\/li\u003e\n\u003cli\u003eNon-variable helix and non-variable index geometry for consistent, predictable cutting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a standard square end mill for use with 7\/16-inch collet chucks and end mill holders in CNC machining centers, vertical milling machines, and manual mills that accept this shank diameter.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist following the machine tool manufacturer's toolholding specifications. Ensure the machine spindle is fully stopped and locked out before inserting or removing the end mill from the collet or end mill holder. Seat the shank to the recommended minimum engagement depth per the toolholder manufacturer's guidelines to prevent pullout under cutting loads. Inspect the cutting edges for chips or damage before each use and replace the tool if edge integrity is compromised.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter (Decimal)\u003c\/strong\u003e: 0.4219 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter (Fraction)\u003c\/strong\u003e: 27\/64 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide (Micrograin)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.4375 inches (7\/16)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Upcut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Index\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.18 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: TITAN USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: TC10527\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TITAN USA","offers":[{"title":"Default Title","offer_id":51729537925426,"sku":"TC10527","price":71.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/cc0ddf64a4c824e452927c6177ef050e_fe033060-5e22-4cbc-9ec3-a58bb58d177a.jpg?v=1788705894","url":"https:\/\/voomisupply.com\/products\/titan-usa-tc10527-square-end-mill-4-flute-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}