{"product_id":"titan-usa-cs35020-combo-drill-countersink-size-00-hss-altin","title":"Titan Usa CS35020 Combo Drill Countersink Size 00 Hss Altin","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe TITAN USA CS35020 is a combination drill and countersink designed to perform two operations in a single pass: drilling a pilot hole and forming the countersink seat simultaneously. Built from high-speed steel with an AlTiN coating, this tool delivers heat and wear resistance suited to production drilling in ferrous and non-ferrous materials. It carries a trade size of 00, a body diameter of 0.125 inches, and a drill point diameter of 0.0250 inches. The included angle is 60 degrees and the drill point angle is 118 degrees. At 1.25 inches overall length, it fits standard drill press and CNC setups. Right-hand cutting direction with a plain cutting edge style.\u003c\/p\u003e\u003cp\u003eThis combo drill countersink is used in metalworking, machining, and fabrication environments where countersunk fastener seats or center-starting points are required. It is well-suited to light-duty work on steel, aluminum, and similar materials. The double end type extends tool life by offering two usable ends, making it a practical choice for high-cycle production work or bench operations where downtime for tool changes is a concern.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eAlTiN coating provides elevated heat resistance and extended tool life compared to uncoated HSS\u003c\/li\u003e\n\u003cli\u003eDouble end design provides two cutting ends per tool\u003c\/li\u003e\n\u003cli\u003e60-degree included angle for standard countersink seat geometry\u003c\/li\u003e\n\u003cli\u003e118-degree drill point angle for self-centering starts on metal\u003c\/li\u003e\n\u003cli\u003ePlain cutting edge style for clean, consistent results\u003c\/li\u003e\n\u003cli\u003eRight-hand cut for use with standard drill presses, lathes, and CNC spindles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement and standard trade-size 00 combo drill countersink for use in drill presses, lathes, and CNC machining centers accepting straight-shank tooling at 0.125 inch body diameter.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eThis tool is typically installed by machinists, toolmakers, or fabricators in a drill press, lathe tailstock, or CNC spindle. Secure the tool firmly in the chuck or collet before operation and confirm the workpiece is clamped or fixtured to prevent movement. Power down all equipment before changing tooling. Follow applicable shop safety practices and machine manufacturer guidelines for spindle speed selection based on material type.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrade Size\u003c\/strong\u003e: 00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Diameter\u003c\/strong\u003e: 0.125 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Point Diameter\u003c\/strong\u003e: 0.0250 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Angle\u003c\/strong\u003e: 60 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Edge Style\u003c\/strong\u003e: Plain\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Double\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: High-Speed Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.05 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: TITAN USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: CS35020\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TITAN USA","offers":[{"title":"Default Title","offer_id":51747471884594,"sku":"CS35020","price":27.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/d97f6e005fa34f70891b239570352a24.jpg?v=1788880833","url":"https:\/\/voomisupply.com\/products\/titan-usa-cs35020-combo-drill-countersink-size-00-hss-altin","provider":"Voomi Supply","version":"1.0","type":"link"}