{"product_id":"titan-usa-cd45528-7-16-inch-hss-split-point-drill-bit","title":"Titan Usa CD45528 7\/16 Inch Hss Split Point Drill Bit","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe TITAN USA CD45528 is a 7\/16 inch mechanics drill bit built for high-demand metal drilling applications. Manufactured from high speed steel (HSS) with a black oxide and gold finish, it delivers consistent cutting performance and corrosion resistance in shop and field environments. The 135-degree split point tip reduces walking at start and requires no center punch on most surfaces. At 4.5 inches overall length with a 2.9375-inch spiral flute, this bit is sized for standard drill presses, hand drills, and magnetic base drills. Electricians, plumbers, HVAC techs, and general mechanics reach for this type of bit when drilling ferrous and non-ferrous metals on the job.\u003c\/p\u003e\u003cp\u003eThis drill bit is suited for right-hand cutting in metal fabrication, conduit work, sheet metal penetration, and general mechanical repair. The straight-cylindrical shank fits standard three-jaw chucks across a wide range of corded and cordless drill platforms. It is appropriate for both residential and light commercial trade work where a reliable, mid-size twist drill is needed. The split point geometry makes it particularly useful when drilling into curved or sloped metal surfaces where bit control is critical.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e7\/16 inch (0.4375 inch) diameter with matching straight-cylindrical shank for secure chuck seating\u003c\/li\u003e\n\u003cli\u003e135-degree split point reduces drill walking and eliminates the need for center punching on most metals\u003c\/li\u003e\n\u003cli\u003eHigh speed steel construction maintains cutting edge hardness under sustained friction and heat\u003c\/li\u003e\n\u003cli\u003eBlack oxide and gold finish provides corrosion resistance and reduces friction during cutting\u003c\/li\u003e\n\u003cli\u003eSpiral flute design promotes efficient chip evacuation to prevent bit clogging\u003c\/li\u003e\n\u003cli\u003eRight-hand cut, Series 455 — 4.5 inches OAL with 2.9375-inch flute length\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a general-purpose mechanics drill bit compatible with any standard three-jaw drill chuck accepting a straight-cylindrical 7\/16 inch shank, including corded drills, cordless drills, and drill presses commonly used in trade applications.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eThis bit is installed and replaced by electricians, plumbers, HVAC technicians, and mechanical tradespeople using standard drill equipment. Ensure the drill is fully powered off and the chuck key is removed before changing bits. Secure the workpiece before drilling and use cutting fluid on harder metals to extend bit life and improve cut quality. Always wear appropriate eye protection when drilling metal.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 7\/16 inch (0.4375 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Angle\u003c\/strong\u003e: 135 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Split Point\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Black Oxide, Gold\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 7\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 2.9375 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 455\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.14 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: TITAN USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: CD45528\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TITAN USA","offers":[{"title":"Default Title","offer_id":51753906209074,"sku":"CD45528","price":20.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/e2943e5041bcfd055f6c4dca0a6fa6c6_71451765-dd04-45bf-97ed-b2aa59020dbc.jpg?v=1788941959","url":"https:\/\/voomisupply.com\/products\/titan-usa-cd45528-7-16-inch-hss-split-point-drill-bit","provider":"Voomi Supply","version":"1.0","type":"link"}