{"product_id":"titan-usa-cd45511-mechanics-drill-bit-11-64-in-hss","title":"Titan Usa CD45511 Mechanics Drill Bit 11\/64 in Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe TITAN USA CD45511 is an 11\/64-inch mechanics drill bit engineered for general-purpose metal drilling in trade and shop environments. Built from high speed steel (HSS) with a black oxide and gold finish, this bit resists heat and surface wear during repeated use. The 135-degree split point tip starts on contact without center-punching, reducing walking on flat or curved workpieces. At 2-7\/8 inches overall length with a straight-cylindrical shank, it seats securely in standard 3-jaw drill chucks. Spiral flutes clear chips efficiently during through-hole and blind-hole drilling operations. This bit is suited for electricians, plumbers, HVAC techs, and general mechanics drilling fastener and conduit clearance holes in steel, aluminum, and similar materials.\u003c\/p\u003e\n\u003cp\u003eThe CD45511 is sized for light-duty drilling tasks common across residential and commercial service work. Its 11\/64-inch diameter is a standard clearance size used when drilling pilot or through holes for sheet metal screws, anchor bolts, and wire management hardware. The right-hand cut and spiral flute geometry work with standard corded or cordless drill drivers. This bit ships individually and is part of TITAN USA Series 455.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e135-degree split point starts on contact without center-punching, reducing bit walk\u003c\/li\u003e\n  \u003cli\u003eHigh speed steel construction handles heat generated during metal drilling\u003c\/li\u003e\n  \u003cli\u003eBlack oxide and gold finish adds surface hardness and corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eStraight-cylindrical shank fits standard 3-jaw chucks on corded and cordless drills\u003c\/li\u003e\n  \u003cli\u003eSpiral flutes evacuate chips from the cut zone to reduce clogging and heat buildup\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut for use with all standard forward-drive drill motors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a standard replacement mechanics drill bit for use with any drill driver or drill press equipped with a chuck sized to accept an 11\/64-inch straight-cylindrical shank.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a licensed tradesperson or qualified mechanic familiar with proper drilling technique for the material being worked. Secure the workpiece before drilling and confirm the chuck is tightened fully before operating. Use appropriate cutting fluid or lubrication when drilling ferrous metals to extend bit life and reduce heat. Wear eye protection at all times during drilling operations.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 11\/64 inches (0.1719 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 135 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Split Point\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2-7\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 1-13\/16 inches (1.8125 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 11\/64 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Black Oxide and Gold\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 455\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: TITAN USA\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: CD45511\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TITAN USA","offers":[{"title":"Default Title","offer_id":51748131340594,"sku":"CD45511","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/e2943e5041bcfd055f6c4dca0a6fa6c6_2043af55-046f-4269-8ab0-819de411a6ff.jpg?v=1788889461","url":"https:\/\/voomisupply.com\/products\/titan-usa-cd45511-mechanics-drill-bit-11-64-in-hss","provider":"Voomi Supply","version":"1.0","type":"link"}