{"product_id":"titan-usa-cd40008-jobber-drill-bit-1-8-inch-hss","title":"Titan Usa CD40008 Jobber Drill Bit 1\/8 Inch Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe TITAN USA CD40008 is a 1\/8 inch diameter jobber-length drill bit designed for general-purpose drilling in metal and other hard materials. Built from high speed steel (HSS) with a black oxide coating, this bit resists heat buildup and light corrosion during repeated use. The standard 118-degree point angle suits most drilling applications without requiring a pilot hole on flat stock. At 2.75 inches overall length with a 1.625 inch flute length, this is a compact, right-hand-cutting bit sized for tight spaces and bench drill press work. It carries a straight-cylindrical shank of 0.1250 inches and a regular spiral flute pattern. Machinists, HVAC sheet metal techs, plumbers, and electricians all reach for this size when drilling pilot holes, conduit knockouts, and bracket mounting points.\u003c\/p\u003e\n\u003cp\u003eThe CD40008 is suited for drilling steel, stainless steel, cast iron, non-ferrous metals, superalloys, and titanium when used at appropriate feeds and speeds. The 13xD flute-to-diameter ratio provides adequate chip clearance for through-hole drilling in workpieces up to 1.625 inches deep. It is sold individually and fits standard drill chucks and driver collets accepting a 1\/8 inch straight shank. This bit works well in handheld drills, drill presses, and magnetic base drills used in field and shop environments.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e1\/8 inch (0.1250 inch) diameter with a diameter tolerance of -0.0005 to +0.0000 inches for consistent fit\u003c\/li\u003e\n  \u003cli\u003e118-degree standard point angle — no pilot hole required on most flat stock\u003c\/li\u003e\n  \u003cli\u003eHigh speed steel construction handles steel, stainless steel, cast iron, non-ferrous metals, superalloys, and titanium\u003c\/li\u003e\n  \u003cli\u003eBlack oxide coating reduces friction and provides light corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eRight-hand cutting, regular spiral, 2-flute design for efficient chip evacuation\u003c\/li\u003e\n  \u003cli\u003eStraight-cylindrical shank fits standard chucks without an adapter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or direct substitute for 1\/8 inch HSS jobber drill bits in the Series CD40 line. Compatible with any drill chuck or collet accepting a 1\/8 inch straight-cylindrical shank.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstall this bit in a properly tightened drill chuck before applying power. Always wear eye protection and secure the workpiece before drilling. Match spindle speed to the workpiece material — harder materials such as stainless steel and titanium require slower RPM and may benefit from a cutting fluid. Inspect the cutting edges before each use and replace the bit if the point shows visible wear or chipping to avoid wandering and oversize holes.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 0.1250 inches (1\/8 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.75 inches (2-3\/4 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 1.625 inches (1-5\/8 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.1250 inches (1\/8 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 1.125 inches (1-1\/8 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Drilling Depth\u003c\/strong\u003e: 1.625 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpiral Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: Black Oxide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDouble Margin\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: -0.0005 to +0.0000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute by Diameter Ratio\u003c\/strong\u003e: 13xD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: CD40\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: TITAN USA\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: CD40008\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TITAN USA","offers":[{"title":"Default Title","offer_id":51733342126386,"sku":"CD40008","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/9448654e100c5a4b4e111b9412067743.jpg?v=1788754430","url":"https:\/\/voomisupply.com\/products\/titan-usa-cd40008-jobber-drill-bit-1-8-inch-hss","provider":"Voomi Supply","version":"1.0","type":"link"}