{"product_id":"tigre-usa-inc-1406-012-poly-insert-elbow-1-1-4-inch","title":"Tigre Usa Inc 1406-012 Poly Insert Elbow 1-1\/4 Inch","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe TIGRE USA INC 1406-012 is a 1-1\/4 inch poly insert elbow fitting designed for use with PE polyethylene pipe in cold water service applications. This Poly x Poly configuration changes flow direction in a polyethylene piping run and is secured with stainless steel clamps for a reliable mechanical connection. The fitting meets ASTM D-2609 standards and carries NSF 14 and NSF 16 listings for potable water service, making it appropriate for water distribution lines where drinking water contact is a concern. Plumbers and irrigation contractors typically specify this fitting for underground or above-grade cold water runs.\u003c\/p\u003e\u003cp\u003eThis fitting is intended for cold water service only. It is not approved for use with compressed air or gases, and it is not listed for installation inside a dwelling. Typical applications include agricultural irrigation lines, rural water supply systems, and outdoor water distribution where polyethylene pipe is the specified pipe material. Each unit ships individually; package quantity is 10 per case.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePoly x Poly insert configuration connects two runs of PE polyethylene pipe at a 90-degree elbow\u003c\/li\u003e\n\u003cli\u003eSecured with stainless steel clamps for a firm, leak-resistant mechanical joint\u003c\/li\u003e\n\u003cli\u003eASTM D-2609 listed construction\u003c\/li\u003e\n\u003cli\u003eNSF 14 and NSF 16 listed for potable cold water service\u003c\/li\u003e\n\u003cli\u003eCold water service only — not rated for compressed air, gas, or interior dwelling use\u003c\/li\u003e\n\u003cli\u003eFitting modifications void the manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use with PE polyethylene pipe in cold water service applications. Compatible pipe must accept a 1-1\/4 inch poly insert fitting secured with stainless steel clamps per ASTM D-2609 requirements.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is performed by a licensed plumber or qualified irrigation contractor. Shut off the water supply and depressurize the line completely before cutting or fitting the pipe. Secure the fitting using appropriately sized stainless steel clamps torqued per clamp manufacturer guidance. Do not use this fitting with compressed air, gas lines, or inside a dwelling, and do not modify the fitting in any way, as modifications void the warranty.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize\u003c\/strong\u003e: 1-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration\u003c\/strong\u003e: Poly x Poly Insert Elbow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe Material Compatibility\u003c\/strong\u003e: PE Polyethylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection Method\u003c\/strong\u003e: Stainless Steel Clamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService\u003c\/strong\u003e: Cold Water Only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications\u003c\/strong\u003e: ASTM D-2609, NSF 14, NSF 16\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit of Measure\u003c\/strong\u003e: EA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.7 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: TIGRE USA INC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 1406-012\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TIGRE","offers":[{"title":"Default Title","offer_id":51523806462258,"sku":"1406-012","price":19.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/071a952b6ab9ea4bcdcbc85b6ea7e14c_191bac1a-a50c-41c2-badc-105a0a65ea00.jpg?v=1785443962","url":"https:\/\/voomisupply.com\/products\/tigre-usa-inc-1406-012-poly-insert-elbow-1-1-4-inch","provider":"Voomi Supply","version":"1.0","type":"link"}