{"product_id":"tigre-usa-inc-1402-131-poly-insert-tee-1x1x3-4-fpt","title":"Tigre Usa Inc 1402-131 Poly Insert Tee 1x1x3\/4 Fpt","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe TIGRE USA INC 1402-131 is a polyethylene insert tee fitting designed for cold water distribution systems using PE polyethylene pipe. The fitting runs 1 inch by 1 inch on the run with a 3\/4 inch female pipe thread (FPT) branch outlet, giving installers a direct threaded connection point off a poly mainline. Insert ends are secured to PE pipe using stainless steel clamps — no solvent cement required. This fitting is rated for cold water service only and is not approved for use with compressed air, gases, or in dwelling applications. It is listed to ASTM D-2609 and certified to NSF 14 and NSF 16 for potable water service.\u003c\/p\u003e\n\u003cp\u003eThe 1402-131 is suited for agricultural irrigation, rural water supply lines, and light commercial cold water distribution where polyethylene mainlines connect to threaded branch fixtures or valves. The FPT branch allows direct connection to standard threaded fittings, gate valves, ball valves, or hose bibs. It is not intended for residential plumbing inside a dwelling or for any pressurized gas application. Installers working on potable water systems can rely on the NSF 14 and NSF 16 listings to meet inspection requirements for drinking water contact.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eInsert x Insert x Female configuration: 1 inch x 1 inch run, 3\/4 inch FPT branch\u003c\/li\u003e\n  \u003cli\u003ePolyethylene construction compatible with PE poly pipe\u003c\/li\u003e\n  \u003cli\u003eStainless steel clamp installation — no solvent cement required\u003c\/li\u003e\n  \u003cli\u003eASTM D-2609 listed construction\u003c\/li\u003e\n  \u003cli\u003eNSF 14 and NSF 16 certified for potable cold water service\u003c\/li\u003e\n  \u003cli\u003eCold water service only — not rated for compressed air, gas, or dwelling use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with PE polyethylene pipe in cold water service applications. Insert ends accept standard poly pipe in the listed sizes and are secured with stainless steel clamps. Not compatible with PVC, CPVC, or copper pipe systems. Fitting modifications void the manufacturer warranty.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is typically performed by licensed plumbers or irrigation contractors working on outdoor or agricultural water supply systems. Shut off and depressurize the water line completely before cutting into the pipe and installing the fitting. Insert ends must be fully seated into the PE pipe and secured with appropriately sized stainless steel clamps torqued per the clamp manufacturer specification. Do not use this fitting on any compressed air or gas line, and do not install in a dwelling.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConfiguration\u003c\/strong\u003e: Insert x Insert x Female Pipe Thread (FPT)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRun Size\u003c\/strong\u003e: 1 inch x 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBranch Size\u003c\/strong\u003e: 3\/4 inch FPT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Polyethylene (Poly)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePipe Compatibility\u003c\/strong\u003e: PE Polyethylene pipe\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eService\u003c\/strong\u003e: Cold water only\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: ASTM D-2609\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCertifications\u003c\/strong\u003e: NSF 14, NSF 16 (potable water)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 10 per unit of measure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.2 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: TIGRE USA INC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 1402-131\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TIGRE","offers":[{"title":"Default Title","offer_id":51524430594354,"sku":"1402-131","price":20.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/fbd40d178c32694ad79c6d17447b07d2.jpg?v=1785448977","url":"https:\/\/voomisupply.com\/products\/tigre-usa-inc-1402-131-poly-insert-tee-1x1x3-4-fpt","provider":"Voomi Supply","version":"1.0","type":"link"}