{"product_id":"thomas-betts-ty546m-flag-marker-cable-tie-7-1in-nylon-100pk","title":"Thomas Betts TY546M Flag Marker Cable Tie 7.1in Nylon 100pk","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe THOMAS BETTS TY546M is a nylon identification flag marker cable tie designed for organized wire and cable management in electrical, data, and industrial installations. Measuring 7.1 inches in overall length with a 0.18-inch width, it bundles cables up to 1.75 inches in diameter and holds with a 50-pound tensile strength. The integrated flag tab provides a flat, writable surface for labeling circuits, conductors, or cable runs directly at the point of installation. Rated from -40 degrees F to 185 degrees F, this tie is suited for both indoor and outdoor environments where weather resistance is required. Sold in packs of 100.\u003c\/p\u003e\n\u003cp\u003eThis tie is used by electricians, low-voltage installers, and industrial maintenance technicians to bundle and identify wire harnesses, panel wiring, conduit runs, and cable trays. The flag marker format is especially useful in control panels and junction boxes where quick visual identification of individual conductors or circuits reduces troubleshooting time. Its weather-resistant nylon construction holds up in exposed or damp locations without becoming brittle or losing tension over time.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eIntegrated flag tab for hand-written or label-printed identification at the bundle point\u003c\/li\u003e\n  \u003cli\u003e50-pound tensile strength for secure, long-term bundling\u003c\/li\u003e\n  \u003cli\u003eHandles bundle diameters up to 1.75 inches\u003c\/li\u003e\n  \u003cli\u003eWeather-resistant nylon rated from -40 degrees F to 185 degrees F\u003c\/li\u003e\n  \u003cli\u003eNatural color for general-purpose use or color-coding flexibility\u003c\/li\u003e\n  \u003cli\u003eMeets CE, MIL-SPEC MS3368-1-9, RoHS, UL, EN, and CSA62275 Type 2 standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a standard identification flag marker cable tie for use in residential, commercial, and industrial electrical installations wherever labeled bundling of wire and cable is required.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by electricians or low-voltage technicians during rough-in, panel termination, or cable tray dressing. Power down or de-energize circuits before working inside panels or enclosures per NEC guidelines. Insert the tail through the locking head and pull snug around the bundle, then trim the excess tail flush with a cable tie gun or flush-cut pliers to avoid sharp edges. Write identification labels on the flag before final installation for best legibility.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCable Tie Type\u003c\/strong\u003e: Identification Flag Marker\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Nylon\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Natural\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 7.1 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Width\u003c\/strong\u003e: 0.18 inches (4.57 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThickness\u003c\/strong\u003e: 0.055 inches (1.41 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Bundle Diameter\u003c\/strong\u003e: 1.75 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTensile Strength\u003c\/strong\u003e: 50 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Operating Temperature\u003c\/strong\u003e: -40 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Operating Temperature\u003c\/strong\u003e: 185 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eResistance Features\u003c\/strong\u003e: Weather-Resistant\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: CE Certified, MIL-SPEC MS3368-1-9, RoHS Compliant, UL Recognized, UL, EN, CSA62275 Type 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 100 pieces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: THOMAS BETTS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: TY546M\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"THOMAS \u0026 BETTS","offers":[{"title":"Default Title","offer_id":51541684650290,"sku":"TY546M","price":143.68,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/be273975bc98a4d03407c0d778a17f06.jpg?v=1785882187","url":"https:\/\/voomisupply.com\/products\/thomas-betts-ty546m-flag-marker-cable-tie-7-1in-nylon-100pk","provider":"Voomi Supply","version":"1.0","type":"link"}