{"product_id":"thomas-betts-tc5342a-cable-tie-mounting-base-2-way-100pk","title":"Thomas Betts TC5342A Cable Tie Mounting Base 2-way 100pk","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe THOMAS BETTS TC5342A is a self-adhesive cable tie mounting base designed to anchor cable ties to flat surfaces without fasteners or drilling. Made from Nylon 6.6, this two-way tie entry base measures 1.125 inches by 1.125 inches and accepts cable ties up to 0.19 inches wide. It uses a pressure-sensitive adhesive backing for quick, tool-free attachment. The TC5342A is sold in a standard pack of 100 and is rated for temperatures from -40 to 185 degrees F, making it suitable for both indoor and outdoor environments. Electricians, HVAC technicians, and panel wiring professionals use these bases to route and secure wire bundles cleanly and efficiently.\u003c\/p\u003e\n\u003cp\u003eThis mounting base is used in a wide range of wiring and cable management applications, including electrical panels, conduit routing, HVAC equipment wiring, and general mechanical enclosures. The two-way tie entry slot allows the cable tie to pass through from either direction, giving installers flexibility in how they orient and dress wire bundles. The adhesive backing eliminates the need for screws or anchors on smooth surfaces, speeding up installation in tight spaces or on finished panels. It is appropriate for both residential and commercial applications where a clean, permanent cable bundle anchor is needed.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003ePressure-sensitive adhesive backing — no drilling or fasteners required\u003c\/li\u003e\n  \u003cli\u003eTwo-way tie entry slot accepts cable ties up to 0.19 inches wide from either direction\u003c\/li\u003e\n  \u003cli\u003eNylon 6.6 construction rated from -40 to 185 degrees F for indoor and outdoor use\u003c\/li\u003e\n  \u003cli\u003e1-piece molded design with no loose components\u003c\/li\u003e\n  \u003cli\u003eBase dimensions: 1.125 inches x 1.125 inches\u003c\/li\u003e\n  \u003cli\u003eSold in a standard pack of 100 units\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with standard cable ties fitting a 0.19-inch tie width slot. Suitable for cable tie management applications in electrical, HVAC, and mechanical installations on smooth, clean surfaces where adhesive mounting is appropriate.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eSurface must be clean, dry, and free of oil or dust before applying the adhesive base for maximum bond strength. Electricians and HVAC technicians typically install these bases during panel wiring or equipment commissioning. Apply firm pressure to the base for several seconds after placement to fully seat the adhesive. Do not install in areas subject to prolonged moisture immersion or where surface temperatures will exceed the rated 185 degrees F limit.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Nylon 6.6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Natural\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMounting Type\u003c\/strong\u003e: Adhesive (Pressure-Sensitive)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTie Entry\u003c\/strong\u003e: 2-Way\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Tie Width\u003c\/strong\u003e: 0.19 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBase Length\u003c\/strong\u003e: 1.125 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBase Width\u003c\/strong\u003e: 1.125 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTemperature Rating\u003c\/strong\u003e: -40 to 185 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e: Indoor \/ Outdoor\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard Package Quantity\u003c\/strong\u003e: 100\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Weight\u003c\/strong\u003e: 0.75 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCountry of Origin\u003c\/strong\u003e: US\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: THOMAS BETTS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: TC5342A\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"THOMAS \u0026 BETTS","offers":[{"title":"Default Title","offer_id":51283985334578,"sku":"TC5342A","price":256.7,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/309279785.jpg?v=1781065093","url":"https:\/\/voomisupply.com\/products\/thomas-betts-tc5342a-cable-tie-mounting-base-2-way-100pk","provider":"Voomi Supply","version":"1.0","type":"link"}