{"product_id":"thomas-betts-nc10106-polycarbonate-enclosure-10x10x6-nema-4x","title":"Thomas Betts NC10106 Polycarbonate Enclosure 10x10x6 Nema 4X","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe THOMAS BETTS NC10106 is a standard polycarbonate electrical enclosure rated for NEMA 1, 2, 3, 3S, 3SX, 3X, 4, and 4X environments. Measuring 10 inches wide by 10 inches high by 6 inches deep, it provides a clear, impact-resistant housing for electrical components, controls, and instrumentation. The clear polycarbonate construction allows visual inspection of interior components without opening the cover. A flat hinged cover with captive screws and swing panels simplifies access during service. This enclosure weighs 5.3 pounds and is suitable for licensed electricians installing control panels, junction boxes, and similar assemblies in both indoor and outdoor locations.\u003c\/p\u003e\n\u003cp\u003eThis enclosure is designed for residential, commercial, and light industrial electrical installations where environmental protection is required. The NEMA 4X rating makes it appropriate for outdoor or wet-location applications, including wash-down areas and corrosive environments. Electricians and control panel builders use this enclosure to house terminal blocks, PLCs, relays, and other low-voltage or line-voltage components. Its polycarbonate material resists impact and does not corrode, making it a practical choice for applications where a steel enclosure would be susceptible to rust or chemical exposure.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eClear polycarbonate construction allows visual inspection without removing the cover\u003c\/li\u003e\n  \u003cli\u003eNEMA 1, 2, 3, 3S, 3SX, 3X, 4, and 4X multi-rating for broad environmental coverage\u003c\/li\u003e\n  \u003cli\u003eImpact-resistant material suitable for demanding indoor and outdoor installations\u003c\/li\u003e\n  \u003cli\u003eFlat hinged cover with captive screws for secure, tool-accessible closure\u003c\/li\u003e\n  \u003cli\u003eIncludes captive cover screws, hinges, and swing panels as standard hardware\u003c\/li\u003e\n  \u003cli\u003ecULus Listed (E88685) and UL Listed 50 certified\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style standard enclosure for electrical control, instrumentation, and junction box applications requiring NEMA 4X-rated polycarbonate housing.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified electrician in accordance with applicable NEC requirements. Disconnect and lock out all power sources before opening or wiring inside the enclosure. Ensure all conduit knockouts and entry points are properly sealed to maintain the NEMA rating after installation. Do not exceed the enclosure interior dimensions when sizing component layouts, and verify that the mounting surface can support the enclosure weight with a full component load.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnclosure Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Polycarbonate\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCover Color\u003c\/strong\u003e: Clear\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCover Type\u003c\/strong\u003e: Hinge Flat\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNEMA Rating\u003c\/strong\u003e: 1, 2, 3, 3S, 3SX, 3X, 4, 4X\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Width\u003c\/strong\u003e: 10 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Height\u003c\/strong\u003e: 10 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Depth\u003c\/strong\u003e: 6 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 5.3 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncludes\u003c\/strong\u003e: Captive Cover Screws, Hinges, Swing Panels\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eResistance Features\u003c\/strong\u003e: Impact-Resistant\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCertifications\u003c\/strong\u003e: cULus Listed E88685, UL Listed 50\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: THOMAS BETTS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: NC10106\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"THOMAS \u0026 BETTS","offers":[{"title":"Default Title","offer_id":51541021753650,"sku":"NC10106","price":1289.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/02f6f1d5c6a76d17b06e51cd7510728a.jpg?v=1785867422","url":"https:\/\/voomisupply.com\/products\/thomas-betts-nc10106-polycarbonate-enclosure-10x10x6-nema-4x","provider":"Voomi Supply","version":"1.0","type":"link"}