{"product_id":"thhncu-generic-thhn2strredmr-thhn-2-awg-stranded-copper-wire","title":"Thhncu-generic thhn2strredmr Thhn 2 Awg Stranded Copper Wire","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe THHNCU-GENERIC thhn2strredmr is a 2 AWG stranded copper conductor wire with THHN-rated insulation, sold cut to length. Built with 19-strand copper construction, it delivers flexible, high-conductivity performance suitable for general wiring applications in conduit. The PVC insulation is finished with a nylon jacket and rated for 600 volts. Ampacity is 95 amps at 60 degrees C, 115 amps at 75 degrees C, and 130 amps at 90 degrees C. The insulation color is red, which aids in circuit identification and phasing. Licensed electricians and electrical contractors are the primary installers of this wire type.\u003c\/p\u003e\u003cp\u003eThis wire is used in commercial and residential electrical installations where THHN-rated conductors are required in conduit or cable trays. Common applications include branch circuit wiring, feeder runs, and panel connections. The cut-to-length format makes it practical for job-site pulls where a full reel is not required. The 90 degrees C dry and wet temperature rating supports use in a range of indoor and outdoor conduit environments. The red jacket color is typically used for phase identification in multi-wire installations.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e2 AWG stranded copper conductor with 19-strand configuration for flexibility\u003c\/li\u003e\n\u003cli\u003eTHHN-rated PVC insulation with nylon outer jacket for pull-through performance in conduit\u003c\/li\u003e\n\u003cli\u003e600-volt rating suitable for general power distribution wiring\u003c\/li\u003e\n\u003cli\u003eAmpacity up to 130 amps at 90 degrees C\u003c\/li\u003e\n\u003cli\u003e90 degrees C temperature rating, rated for both dry and wet locations\u003c\/li\u003e\n\u003cli\u003eRed insulation color for phase or circuit identification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in standard conduit systems requiring THHN-rated 2 AWG copper conductors at 600 volts or less, consistent with NEC ampacity and installation requirements for this conductor type.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a licensed electrician in accordance with the National Electrical Code (NEC) and applicable local codes. De-energize all circuits and verify with a meter before beginning any wiring work. Use appropriate wire-pulling lubricant when pulling through conduit to avoid jacket damage. Verify conduit fill calculations comply with NEC Chapter 9 tables before installation.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConductor Material\u003c\/strong\u003e: Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConductor Size\u003c\/strong\u003e: 2 AWG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStranding\u003c\/strong\u003e: 19 Strand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmpacity\u003c\/strong\u003e: 95 amps at 60 degrees C, 115 amps at 75 degrees C, 130 amps at 90 degrees C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage Rating\u003c\/strong\u003e: 600 volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Rating\u003c\/strong\u003e: 90 degrees C (Dry\/Wet)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsulation Material\u003c\/strong\u003e: PVC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJacket Material\u003c\/strong\u003e: Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsulation Color\u003c\/strong\u003e: Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Diameter\u003c\/strong\u003e: 0.381 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Type\u003c\/strong\u003e: THHN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 241 pounds per 1000 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReel Length\u003c\/strong\u003e: 5000 feet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: THHNCU-GENERIC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: thhn2strredmr\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"THHNCU-GENERIC","offers":[{"title":"Default Title","offer_id":51268769841458,"sku":"THHN2STRREDMR","price":3712.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/308908472.jpg?v=1780705335","url":"https:\/\/voomisupply.com\/products\/thhncu-generic-thhn2strredmr-thhn-2-awg-stranded-copper-wire","provider":"Voomi Supply","version":"1.0","type":"link"}