{"product_id":"taco-1911dae10131292-close-coupled-in-line-pump-0-33-hp","title":"Taco 1911dae10131292* Close-coupled In-line Pump 0.33 Hp","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe TACO 1911dae10131292* is a close-coupled in-line circulating pump designed for hydronic heating and cooling systems. It features 1-1\/2-inch suction and 1-1\/2-inch discharge ports in a true in-line configuration, reducing piping stress and simplifying installation. The stainless steel casing and 4-3\/4-inch stainless steel impeller pair with a cast iron bracket and bronze wear ring for durability in demanding service. A 1\/3 HP ODP motor runs at 1750 RPM on 115\/208-230 volts, single-phase, 60 Hz power. Licensed HVAC and plumbing contractors install this pump in commercial and residential hydronic applications where in-line placement, easy serviceability, and reliable long-term operation are required.\u003c\/p\u003e\n\u003cp\u003eThis pump is suited for closed-loop hydronic heating and cooling systems, building services circulation, and similar fluid-handling applications. It handles fluid temperatures up to 250 degrees F, making it appropriate for high-temperature hot water systems. The rear pull-out design allows the motor and rotating assembly to be removed for service without breaking into the piping. The unit can be installed in horizontal or vertical orientations without external strapping, offering layout flexibility in mechanical rooms and tight spaces.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eIn-line 1-1\/2-inch suction and discharge ports reduce piping strain and simplify system layout\u003c\/li\u003e\n  \u003cli\u003eStainless steel casing and impeller with bronze wear ring resist corrosion in hydronic service\u003c\/li\u003e\n  \u003cli\u003eMechanical seal uses ceramic seat, carbon rotor, and EPT rubber elastomers for long service life\u003c\/li\u003e\n  \u003cli\u003eRear pull-out design allows motor and rotating component removal without disturbing connected piping\u003c\/li\u003e\n  \u003cli\u003eIntegrated pressure tappings support differential pressure readings across the pump\u003c\/li\u003e\n  \u003cli\u003ePermanently sealed, grease-lubricated motor ball bearings support maintenance-free operation\u003c\/li\u003e\n  \u003cli\u003eCompanion flanges included for direct connection to standard piping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style close-coupled in-line pump for the TACO 1900 Series, suitable for residential and light commercial hydronic heating and cooling piping systems.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a licensed plumber or HVAC mechanical contractor in accordance with applicable local codes and ASHRAE hydronic system guidelines. Shut off and isolate the system, depressurize, and allow fluid to cool before removing or installing the pump. Verify that supply voltage and phase match the motor nameplate before energizing. The rear pull-out design simplifies field service, but always confirm the isolation valves are fully closed and the system is de-energized before pulling the rotating assembly.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHorsepower\u003c\/strong\u003e: 0.33 HP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVoltage\u003c\/strong\u003e: 115\/208-230 volts\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePhase\u003c\/strong\u003e: 1 PH\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency\u003c\/strong\u003e: 60 Hz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRPM\u003c\/strong\u003e: 1750\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMotor Enclosure\u003c\/strong\u003e: ODP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMotor Frame\u003c\/strong\u003e: 56C\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSuction Size\u003c\/strong\u003e: 1-1\/2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDischarge Size\u003c\/strong\u003e: 1-1\/2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNominal Impeller Diameter\u003c\/strong\u003e: 4-3\/4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCasing Material\u003c\/strong\u003e: Stainless Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eImpeller Material\u003c\/strong\u003e: Stainless Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWear Ring Material\u003c\/strong\u003e: Bronze\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeal Seat Material\u003c\/strong\u003e: Ceramic\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeal Rotor Material\u003c\/strong\u003e: Carbon\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeal Elastomer Material\u003c\/strong\u003e: EPT Rubber\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e: 250 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePump Type\u003c\/strong\u003e: Close-Coupled In-Line\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 1900\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: TACO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 1911dae10131292*\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TACO","offers":[{"title":"Default Title","offer_id":51672302256434,"sku":"1911DAE10131292*","price":2560.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/66ffec4916586db2ffdd318af1d29e6d.jpg?v=1787965749","url":"https:\/\/voomisupply.com\/products\/taco-1911dae10131292-close-coupled-in-line-pump-0-33-hp","provider":"Voomi Supply","version":"1.0","type":"link"}