{"product_id":"taco-1635dae20000000-in-line-cartridge-pump-less-motor","title":"Taco 1635dae20000000 In-line Cartridge Pump Less Motor","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe TACO 1635dae20000000 is an in-line cartridge pump from the 1600 Series, designed for closed-loop hydronic heating and cooling systems in commercial and light-industrial applications. It ships less motor, requiring the installer to supply the drive unit using the included 133-031 bracket. The casing, impeller, faceplate, and shaft are all stainless steel construction, while a cast iron bracket supports the rotating assembly. A 2-inch suction and 2-inch discharge configuration pairs with a 6.15-inch nominal impeller diameter. Maximum rated operating temperature is 250 degrees F. Licensed mechanical contractors and pipefitters install this pump in wet piping systems where long service intervals and straightforward maintenance are a priority.\u003c\/p\u003e\n\u003cp\u003eThe 1635dae20000000 is suited for in-line installation in hydronic heating, chilled water, and process fluid piping systems. Its rear pull-out design allows the motor and all rotating components to be removed for servicing without breaking the pipe connections. The replaceable bearing cartridge assembly isolates the ball bearings from system fluid temperatures, extending service life in high-temperature hydronic circuits. This pump is appropriate for both new construction and retrofit applications where a 2-inch in-line cartridge pump is specified.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eStainless steel casing, impeller, faceplate, and shaft for corrosion resistance in hydronic service\u003c\/li\u003e\n  \u003cli\u003eReplaceable bearing cartridge assembly isolates ball bearings from system fluid temperatures\u003c\/li\u003e\n  \u003cli\u003eMechanical seal assembly: ceramic seat, carbon rotor, and EPT elastomers\u003c\/li\u003e\n  \u003cli\u003eRear pull-out design allows full motor and rotor removal without disturbing connected piping\u003c\/li\u003e\n  \u003cli\u003eShips less motor — installer supplies drive using the 133-031 bracket\u003c\/li\u003e\n  \u003cli\u003eRated for fluid temperatures up to 250 degrees F\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style in-line cartridge pump for hydronic systems requiring a 2-inch suction and 2-inch discharge configuration. Motor drive installation uses the 133-031 bracket supplied with the assembly.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a licensed mechanical contractor or journeyman pipefitter in accordance with applicable local mechanical codes and ASME piping standards. Isolate and depressurize the system fully before removing or installing the pump assembly. Because this unit ships less motor, verify motor frame and coupling compatibility with the 133-031 bracket before starting installation. The rear pull-out feature allows servicing of rotating components without unbolting the pump flanges, but the system must still be shut down and drained to the pump elevation before service begins.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePump Type\u003c\/strong\u003e: In-Line Cartridge Pump\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 1600\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSuction Size\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDischarge Size\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNominal Impeller Diameter\u003c\/strong\u003e: 6.15 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Operating Temperature\u003c\/strong\u003e: 250 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCasing Material\u003c\/strong\u003e: Stainless Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eImpeller Material\u003c\/strong\u003e: Stainless Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShaft Material\u003c\/strong\u003e: Stainless Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBracket Material\u003c\/strong\u003e: Cast Iron\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeal Seat Material\u003c\/strong\u003e: Ceramic\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeal Rotor Material\u003c\/strong\u003e: Carbon\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeal Elastomer Material\u003c\/strong\u003e: EPT Rubber\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMotor\u003c\/strong\u003e: Not Included (Less Motor)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrive Bracket\u003c\/strong\u003e: 133-031\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: TACO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 1635dae20000000\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TACO","offers":[{"title":"Default Title","offer_id":51668911620402,"sku":"1635DAE20000000","price":2914.31,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/5559a20fc6054f7735c69dd5e9993c96_ec4a37de-0981-4608-9b1d-b578255c65d8.jpg?v=1787953744","url":"https:\/\/voomisupply.com\/products\/taco-1635dae20000000-in-line-cartridge-pump-less-motor","provider":"Voomi Supply","version":"1.0","type":"link"}