{"product_id":"taco-1619dae30000000-inline-cartridge-pump-less-motor","title":"Taco 1619dae30000000 Inline Cartridge Pump Less Motor","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe TACO 1619dae30000000 is an inline cartridge pump supplied in a less-motor configuration, meaning the motor is not included and must be sourced and mounted separately. Part of the TACO 1600 Series, this pump features a 2-inch suction port and a 2-inch discharge port, paired with a 7.9-inch nominal diameter impeller. Wetted components — including the casing, impeller, face plate, and shaft — are constructed from stainless steel. A cast iron bracket supports the assembly and accommodates external prime movers. This pump is designed for installation by licensed plumbers and mechanical contractors in commercial and industrial hydronic piping systems.\u003c\/p\u003e\n\u003cp\u003eThe 1619dae30000000 is suited for inline hydronic applications where high flow and moderate head are required. Its rear pull-out design allows complete removal of the motor and all rotating components for servicing without disturbing the connected piping — a significant advantage in tight mechanical rooms or systems where downtime must be minimized. The permanently sealed, grease-lubricated bearing cartridge isolates the bearing assembly from system fluid, extending service intervals. This pump handles fluid temperatures up to 250 degrees F, making it appropriate for higher-temperature hot water heating systems in commercial settings.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eLess-motor configuration with mounting bracket included for use with external prime movers\u003c\/li\u003e\n  \u003cli\u003e2-inch suction and 2-inch discharge ports for inline piping installation\u003c\/li\u003e\n  \u003cli\u003e7.9-inch nominal diameter impeller\u003c\/li\u003e\n  \u003cli\u003eStainless steel casing, impeller, face plate, and shaft for corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eReplaceable bearing cartridge with permanently sealed, grease-lubricated ball bearings\u003c\/li\u003e\n  \u003cli\u003eStandard Type 21 mechanical seal with ceramic seat, carbon mating ring, and EPT elastomers\u003c\/li\u003e\n  \u003cli\u003eRear pull-out design for in-place serviceability without disconnecting piping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style inline cartridge pump for commercial hydronic heating and cooling systems requiring a 2-inch inline pump with a less-motor configuration in the TACO 1600 Series.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a licensed plumber or mechanical contractor familiar with commercial hydronic piping systems. Shut down the system and isolate the pump using service valves before any service or installation work. Ensure the external motor is properly rated and coupled to the pump shaft before energizing. Follow all applicable local mechanical codes and manufacturer coupling specifications when mating the motor to the bracket assembly.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 1600\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePump Type\u003c\/strong\u003e: Inline Cartridge Pump\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSuction Size\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDischarge Size\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eImpeller Diameter\u003c\/strong\u003e: 7.9 inches (nominal)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Fluid Temperature\u003c\/strong\u003e: 250 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCasing Material\u003c\/strong\u003e: Stainless Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eImpeller Material\u003c\/strong\u003e: Stainless Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBracket Material\u003c\/strong\u003e: Cast Iron\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeal Type\u003c\/strong\u003e: Type 21 Mechanical Seal (ceramic seat, carbon mating ring, EPT elastomers)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBearing Type\u003c\/strong\u003e: Permanently sealed, grease-lubricated ball bearings\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMotor Included\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: TACO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 1619dae30000000\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TACO","offers":[{"title":"Default Title","offer_id":51619908944178,"sku":"1619DAE30000000","price":2914.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/5559a20fc6054f7735c69dd5e9993c96_9ee0d64e-1f43-492f-ad88-93a63380b3d7.jpg?v=1787337007","url":"https:\/\/voomisupply.com\/products\/taco-1619dae30000000-inline-cartridge-pump-less-motor","provider":"Voomi Supply","version":"1.0","type":"link"}