{"product_id":"sumitomo-5l00w1c-replaceable-tip-drill-25-81-26-8mm","title":"Sumitomo 5L00W1C Replaceable-tip Drill 25.81-26.8mm","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SUMITOMO 5L00W1C is a replaceable-tip drill designed for precision hole-making in metalworking and machining applications. Part of the SMD series, it accepts SMDT-style inserts and delivers a drill depth-to-diameter ratio of 3xD, with a maximum drill depth of 3.622 inches. The drill covers a diameter range of 25.81 mm to 26.8 mm (1.0161 to 1.0551 decimal inches) and features a 1-1\/4 inch whistle notch shank for secure toolholder engagement. Through-coolant capability supports chip evacuation and thermal management during deep-hole drilling operations. Machinist and CNC operators working in production environments will find this body well-suited to high-feed drilling cycles.\u003c\/p\u003e\n\u003cp\u003eThis replaceable-tip drill body is intended for use on CNC machining centers and turning centers equipped with SMDH-style toolholders. The whistle notch shank provides positive axial retention in compatible toolholders. With an overall length of 6.89 inches and a flute length of 4.517 inches, the 5L00W1C is configured for intermediate-depth drilling passes. It is appropriate for job shop and production-floor use where repeatable bore diameter consistency and fast tip changeover are priorities.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eDiameter range of 25.81 mm to 26.8 mm (1.0161 to 1.0551 inches) using SMDT replaceable inserts\u003c\/li\u003e\n  \u003cli\u003e3xD depth-to-diameter ratio with a maximum drill depth of 3.622 inches\u003c\/li\u003e\n  \u003cli\u003eThrough-coolant design for active chip flushing and heat reduction\u003c\/li\u003e\n  \u003cli\u003e1-1\/4 inch whistle notch shank for positive axial retention in SMDH toolholders\u003c\/li\u003e\n  \u003cli\u003eSteel body construction for durability in high-cycle machining environments\u003c\/li\u003e\n  \u003cli\u003eReplaceable-tip design reduces tooling cost by allowing insert swap without replacing the body\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eCompatible with SMDT-style replaceable drill inserts and SMDH-style toolholders. Part of the SMD series drill body platform.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist or tooling setup technician. Secure the whistle notch shank fully into the SMDH toolholder before operation and confirm proper torque to the toolholder manufacturer specification. Verify through-coolant lines are connected and flow is confirmed before starting a drilling cycle. Always inspect the SMDT insert seating and condition before each run.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Drill Diameter\u003c\/strong\u003e: 25.81 mm (1.0161 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Drill Diameter\u003c\/strong\u003e: 26.80 mm (1.0551 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Drill Depth\u003c\/strong\u003e: 3.622 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Depth by Diameter Ratio\u003c\/strong\u003e: 3xD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 6.89 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 4.517 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Length\u003c\/strong\u003e: 4.517 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Whistle Notch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1-1\/4 inch (1.2500 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 2.375 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatible Insert Style\u003c\/strong\u003e: SMDT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eToolholder Style\u003c\/strong\u003e: SMDH\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: SMD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.2 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SUMITOMO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 5L00W1C\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SUMITOMO","offers":[{"title":"Default Title","offer_id":51747236643122,"sku":"5L00W1C","price":485.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/03085149fd22cf468b967fd27a703e8c_e846f1e8-5485-4590-9e1d-041cdb0df9bc.jpg?v=1788877945","url":"https:\/\/voomisupply.com\/products\/sumitomo-5l00w1c-replaceable-tip-drill-25-81-26-8mm","provider":"Voomi Supply","version":"1.0","type":"link"}