{"product_id":"sumitomo-5l00w0h-replaceable-tip-drill-16-51-17-50mm-weldon","title":"Sumitomo 5L00W0H Replaceable-tip Drill 16.51-17.50mm Weldon","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SUMITOMO 5L00W0H is a replaceable-tip drill body engineered for precision hole-making in metal cutting applications. It accepts SMDT-style insert tips and features a 3\/4-inch Weldon flat shank for positive, non-slip retention in compatible toolholders. The drill body covers a diameter range of 16.51 to 17.50 mm (0.650 to 0.689 inches) and delivers a maximum drill depth of 3.78 inches, supporting a 3xD depth-to-diameter ratio. Through-coolant capability directs cutting fluid directly to the cutting zone, extending insert life and aiding chip evacuation in deep-hole operations. This body is part of the SMD series and is intended for use by machinists and CNC operators in production environments.\u003c\/p\u003e\n\u003cp\u003eThe 5L00W0H is suited for drilling operations in ferrous and non-ferrous metals where consistent hole geometry and high feed rates are required. The Weldon flat shank interfaces with SMDH-style toolholders. With an overall length of 6.693 inches, a flute length of 4.693 inches, and a shank length of 2.000 inches, this body fits standard CNC machining center setups where controlled depth and rigidity are critical. The replaceable-tip design reduces downtime by allowing insert changes without removing the body from the holder.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eAccepts SMDT-style replaceable insert tips for quick cutting-edge changes\u003c\/li\u003e\n  \u003cli\u003eThrough-coolant design improves chip flushing and extends tool life in deep holes\u003c\/li\u003e\n  \u003cli\u003e3\/4-inch Weldon flat shank provides positive drive and minimal runout\u003c\/li\u003e\n  \u003cli\u003e3xD depth-to-diameter ratio supports maximum drill depth of 3.78 inches\u003c\/li\u003e\n  \u003cli\u003eCompatible with SMDH-series toolholders for rigid, repeatable setups\u003c\/li\u003e\n  \u003cli\u003eSteel body construction balances rigidity and weight in high-feed drilling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with SMDT-style insert tips and SMDH-series toolholders within the SUMITOMO SMD replaceable-tip drill system. Requires a toolholder with a 3\/4-inch Weldon flat shank bore.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist or CNC setup technician. Ensure the machine spindle is fully stopped and locked out before mounting or removing the drill body. Seat the Weldon flat shank fully into the toolholder and torque the set screw per the toolholder manufacturer specifications. Verify through-coolant passages are clear and that coolant pressure is adequate before beginning the drilling cycle.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Drill Diameter\u003c\/strong\u003e: 16.51 mm (0.650 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Drill Diameter\u003c\/strong\u003e: 17.50 mm (0.689 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Drill Depth\u003c\/strong\u003e: 3.78 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Depth by Diameter Ratio\u003c\/strong\u003e: 3xD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 6.693 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 4.693 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Length\u003c\/strong\u003e: 4.693 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 2.000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Weldon Flat\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3\/4 inch (0.750 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatible Insert Style\u003c\/strong\u003e: SMDT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eToolholder Style\u003c\/strong\u003e: SMDH\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: SMD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThrough Coolant\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Application\u003c\/strong\u003e: Drilling\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1 pound\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23291502\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SUMITOMO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 5L00W0H\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SUMITOMO","offers":[{"title":"Default Title","offer_id":51746559689010,"sku":"5L00W0H","price":465.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/7a2afefdfd6f63940a21616889a164c8.jpg?v=1788871310","url":"https:\/\/voomisupply.com\/products\/sumitomo-5l00w0h-replaceable-tip-drill-16-51-17-50mm-weldon","provider":"Voomi Supply","version":"1.0","type":"link"}