{"product_id":"sumitomo-5khz278-carbide-replaceable-tip-drill-27mm-acx80","title":"Sumitomo 5KHZ278 Carbide Replaceable Tip Drill 27mm ACX80","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SUMITOMO 5KHZ278 is a carbide replaceable tip drill in the SMD series, designed for high-performance hole-making in a wide range of workpiece materials. It accepts a solid carbide MEL-geometry tip with a 140-degree included angle and a 27mm (1.063 inch) cutting diameter. The tip carries a PVD-applied TiAlCr and TiSi dual-layer coating that supports extended tool life across ferrous and non-ferrous applications. Through-coolant capability is built in, allowing coolant delivery directly to the cutting zone to manage heat and chip evacuation during deep or high-feed drilling cycles. Licensed machinists, CNC operators, and tooling technicians are the primary users of this drill body.\u003c\/p\u003e\n\u003cp\u003eThe 5KHZ278 is rated for universal primary workpiece material compatibility, covering material codes K, M, P, and S. This range spans cast iron, stainless and heat-resistant steels, general carbon and alloy steels, and non-ferrous materials, making it a practical tool for job shops and production environments running varied materials. The replaceable tip design reduces tooling cost per hole by allowing tip indexing without discarding the drill body. It is suited for machining centers with through-spindle coolant capability where consistent bore quality and cycle efficiency are priorities.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide MEL-geometry replaceable tip with 140-degree included angle for controlled entry and chip formation\u003c\/li\u003e\n  \u003cli\u003ePVD TiAlCr and TiSi dual-layer coating for extended wear resistance across multiple material groups\u003c\/li\u003e\n  \u003cli\u003eThrough-coolant design delivers coolant directly to the cutting edge for heat management and chip evacuation\u003c\/li\u003e\n  \u003cli\u003eACX80 manufacturer grade optimized for universal workpiece material compatibility (K, M, P, S codes)\u003c\/li\u003e\n  \u003cli\u003eSMD series replaceable tip system reduces cost per hole compared to solid-body drills\u003c\/li\u003e\n  \u003cli\u003e27mm cutting diameter (1.063 inches) for precise, consistent bore sizing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in machining centers equipped with through-spindle coolant and compatible with SUMITOMO SMD series drill bodies accepting the MEL replaceable tip format in the 27mm diameter class.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and tip changes should be performed by a qualified CNC operator or tooling technician with the machine in a full stop and locked-out state. Ensure the drill body and tip seating surfaces are clean and free of chips before seating the replaceable tip. Verify through-coolant connection integrity and confirm proper torque on the clamping mechanism per the toolholder manufacturer specifications before resuming operation. Do not operate this drill body without through-coolant active, as the cutting geometry and coating are optimized for cooled-cutting conditions.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 27mm (1.063 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTip Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: ACX80\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: SMD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Geometry\u003c\/strong\u003e: MEL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded Angle\u003c\/strong\u003e: 140 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: TiAlCr and TiSi (PVD applied)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThrough Coolant\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material Codes\u003c\/strong\u003e: K, M, P, S (Universal)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e: 0.8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 2.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 2.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.15 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23242105\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SUMITOMO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 5KHZ278\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SUMITOMO","offers":[{"title":"Default Title","offer_id":51728512352562,"sku":"5KHZ278","price":176.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/f0e73c6fff832b5019feaf4b10380ecc_ecf44e3d-b022-482c-b5be-6760ef0130aa.jpg?v=1788692461","url":"https:\/\/voomisupply.com\/products\/sumitomo-5khz278-carbide-replaceable-tip-drill-27mm-acx80","provider":"Voomi Supply","version":"1.0","type":"link"}