{"product_id":"sumitomo-19r5334-turning-insert-cnmg431egu-ac6020m-carbide","title":"Sumitomo 19R5334 Turning Insert CNMG431EGU AC6020M Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SUMITOMO 19R5334 is a solid carbide turning insert in the CNMG431EGU configuration, coated with Sumitomo's Absotech Platinum finish applied via CVD process. Designed for negative-rake turning operations, this insert carries the AC6020M manufacturer grade and is engineered primarily for machining stainless steel. It features an 80-degree diamond insert shape, a neutral cutting direction, and an EGU chip breaker geometry. At 0.5079 inches in length with a 1\/2-inch inscribed circle and a 1\/64-inch corner radius, it fits standard CNMG toolholders using pin and screw holding methods. Machinists and tooling specialists working in production turning environments install these inserts.\u003c\/p\u003e\n\u003cp\u003eThis insert is rated for Material Grade M20 and is classified under Primary Workpiece Material Code M, indicating suitability for austenitic and ferritic stainless steels. The EGU chip breaker geometry supports stable chip control during continuous and interrupted cuts on difficult-to-machine materials. The CVD-applied Absotech Platinum coating provides wear resistance and thermal stability at elevated cutting speeds. It conforms to ANSI code CNMG431EGU and ISO code CNMG120404N-GU, meeting both ANSI and ISO 13399 standards, making it compatible with toolholder systems dimensioned to either standard. The CN series designation applies. This insert is sold individually but requires a minimum order quantity of 10 units.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eAbsotech Platinum CVD coating for wear resistance and thermal stability on stainless steel\u003c\/li\u003e\n  \u003cli\u003eAC6020M grade with EGU chip breaker geometry for controlled chip evacuation\u003c\/li\u003e\n  \u003cli\u003e80-degree diamond insert shape (Shape Code C) with neutral cutting direction\u003c\/li\u003e\n  \u003cli\u003e1\/64-inch corner radius and 1\/2-inch inscribed circle in CNMG431EGU form factor\u003c\/li\u003e\n  \u003cli\u003ePin and screw holding method compatible with standard CNMG toolholder systems\u003c\/li\u003e\n  \u003cli\u003eConforms to ANSI and ISO 13399 standards; dual-coded CNMG431EGU and CNMG120404N-GU\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in standard CNMG toolholders using pin and screw clamping. ANSI code CNMG431EGU and ISO code CNMG120404N-GU confirm dimensional interchangeability with toolholder systems dimensioned to either standard. Primary application is stainless steel turning at Material Grade M20.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist or tooling technician with the machine powered down and spindle locked before changing inserts. Seat the insert fully against the toolholder pocket before tightening the clamping screw or pin to avoid seating errors that affect runout. Inspect the insert pocket and clamp for wear or damage each time inserts are indexed or replaced. Follow the machine tool manufacturer's torque specifications for the clamping hardware.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: CNMG\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eANSI Code\u003c\/strong\u003e: CNMG431EGU\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eISO Code\u003c\/strong\u003e: CNMG120404N-GU\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Shape\u003c\/strong\u003e: Diamond (80 degrees, Shape Code C)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: AC6020M\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: M20\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: Absotech Platinum\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating Process\u003c\/strong\u003e: CVD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChip Breaker\u003c\/strong\u003e: EGU\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Neutral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRake\u003c\/strong\u003e: Negative\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRake Angle\u003c\/strong\u003e: 7 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRelief Angle\u003c\/strong\u003e: 0 degrees (Clearance Code N)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTolerance Code\u003c\/strong\u003e: M\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Length\u003c\/strong\u003e: 0.5079 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInscribed Circle\u003c\/strong\u003e: 0.5 inches (1\/2 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Thickness\u003c\/strong\u003e: 0.1875 inches (3\/16 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 1\/64 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHole Diameter\u003c\/strong\u003e: 5.16 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Pin and Screw\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Stainless Steel (Code M)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: CN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI, ISO 13399\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.5 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SUMITOMO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 19R5334\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SUMITOMO","offers":[{"title":"Default Title","offer_id":51747239592242,"sku":"19R5334","price":188.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/485fdd57397c2771535d7efecdb27e57_61f3c410-9de9-41ff-9762-3f3ae74344f4.jpg?v=1788878011","url":"https:\/\/voomisupply.com\/products\/sumitomo-19r5334-turning-insert-cnmg431egu-ac6020m-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}