{"product_id":"sumitomo-196ccgy-turning-insert-wnmg431eef-ac6030m-carbide","title":"Sumitomo 196CCGY Turning Insert WNMG431EEF AC6030M Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SUMITOMO 196CCGY is a solid carbide turning insert designed for precision metal cutting on CNC lathes and turning centers. Manufactured to ANSI code WNMG431EEF and ISO code WNMG080404N-EF, it carries the AC6030M grade with a CVD coating for extended tool life under demanding cutting conditions. The insert features an 80-degree trigon (W) shape with a neutral hand orientation and a negative rake geometry. With a 1\/2-inch inscribed circle and a 1\/64-inch corner radius, this insert is suited for general-purpose turning operations where surface finish and edge consistency are critical. Machinists and CNC operators install this insert in compatible toolholders as a precision cutting consumable.\u003c\/p\u003e\n\u003cp\u003eThe 196CCGY is engineered primarily for turning stainless steel workpieces, making it a go-to insert for shops handling austenitic or duplex stainless grades. The EEF chip breaker geometry is optimized for controlling chips in these difficult-to-machine materials. It fits into WNMG-style insert seats in standard turning toolholders and boring bars. This insert belongs to the Sumitomo TN series and is held in place by a clamp and pin clamping method, which is standard on most WNMG-format toolholder bodies. Sold individually per package with a minimum order quantity of 10 pieces.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eAC6030M grade with CVD coating for wear resistance on stainless steel\u003c\/li\u003e\n  \u003cli\u003e80-degree trigon insert shape (ANSI WNMG431EEF) with negative rake geometry\u003c\/li\u003e\n  \u003cli\u003eEEF chip breaker designed for chip control in stainless steel turning\u003c\/li\u003e\n  \u003cli\u003e1\/64-inch corner radius for balanced edge strength and surface finish\u003c\/li\u003e\n  \u003cli\u003eClamp and pin holding method for secure seating in compatible toolholders\u003c\/li\u003e\n  \u003cli\u003eCompliant with ANSI and ISO 13399 standards for insert identification\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a direct-fit replacement for WNMG431-style insert seats in standard WNMG-format turning toolholders and boring bars. Compatible toolholders must accept a clamp and pin clamping method with a 0.2031-inch hole diameter.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eThis insert is installed by qualified machinists or CNC tooling technicians. Power down and lock out the machine before changing inserts. Seat the insert firmly against all pocket walls before tightening the clamp to ensure proper indexing and edge engagement. Inspect the insert pocket for wear or debris prior to installation, as a damaged pocket will reduce tool life and dimensional accuracy.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eANSI Code\u003c\/strong\u003e: WNMG431EEF\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eISO Code\u003c\/strong\u003e: WNMG080404N-EF\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: AC6030M\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: CVD Coated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Shape\u003c\/strong\u003e: Trigon (W) 80 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChip Breaker\u003c\/strong\u003e: EEF\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Neutral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRake\u003c\/strong\u003e: Negative\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRelief Angle\u003c\/strong\u003e: 0 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInscribed Circle\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Length\u003c\/strong\u003e: 0.3425 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Thickness\u003c\/strong\u003e: 0.1875 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.0156 inches (1\/64 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHole Diameter\u003c\/strong\u003e: 0.2031 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Stainless Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Clamp and Pin\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: TN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI, ISO 13399\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.1 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SUMITOMO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 196CCGY\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SUMITOMO","offers":[{"title":"Default Title","offer_id":51738892271922,"sku":"196CCGY","price":190.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/b7a4a0a1bfa662407d4ef71e00499ffe.jpg?v=1788806294","url":"https:\/\/voomisupply.com\/products\/sumitomo-196ccgy-turning-insert-wnmg431eef-ac6030m-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}