{"product_id":"sumitomo-16cdbcd-pcd-turning-insert-0-5in-55-degree-diamond","title":"Sumitomo 16CDBCD Pcd Turning Insert 0.5in 55 Degree Diamond","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe SUMITOMO 16CDBCD is a Polycrystalline Diamond (PCD) turning insert designed for precision material removal on non-ferrous metals and other difficult-to-machine workpieces. This insert features a 55-degree diamond shape (DNMX style) with a positive rake geometry, delivering clean shear angles and reduced cutting forces. The 0.5-inch inscribed circle, 3\/16-inch thickness, and 1\/32-inch corner radius make it well suited for finishing and semi-finishing passes where surface quality and tool life are the primary concerns. Manufactured to grade DA2200 with an uncoated PCD cutting edge, it is installed by machinists and tooling technicians on CNC turning centers and manual lathes.\u003c\/p\u003e\u003cp\u003eThis insert is used in turning operations on non-ferrous materials including aluminum alloys, copper, brass, and composite materials. It is appropriate for both production shop and job-shop environments where tight tolerances and long tool life are required. The NF-DNMX insert style supports clamp and pin holding methods, making it compatible with standard DNMX-style toolholders commonly found in CNC turning applications. It is held to ANSI and ISO 13399 standards, supporting interoperability with modern tooling management systems.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePolycrystalline Diamond (PCD) cutting material for superior wear resistance on non-ferrous workpieces\u003c\/li\u003e\n\u003cli\u003e55-degree diamond insert shape with positive rake for reduced cutting forces and improved chip flow\u003c\/li\u003e\n\u003cli\u003eGrade DA2200 with uncoated PCD edge for direct material contact without coating interference\u003c\/li\u003e\n\u003cli\u003e1\/32-inch corner radius suitable for finishing and semi-finishing pass profiles\u003c\/li\u003e\n\u003cli\u003eClamp and pin holding method for secure seating in DNMX-compatible toolholders\u003c\/li\u003e\n\u003cli\u003eMeets ANSI and ISO 13399 standards for tooling data interoperability\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in DNMX-style turning toolholders that accept clamp and pin insert retention. Compatible with ANSI code NFDNMX432 and ISO code NF-DNMX150408 toolholders. Intended for primary use on non-ferrous metal workpieces per material grade code N.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist or tooling technician with the machine fully powered down and the spindle locked before seating or indexing the insert. Ensure the insert pocket and seating surfaces are clean and free of debris before clamping. Use the correct torque driver for the clamp screw as specified by the toolholder manufacturer. Follow your facility's tooling change procedures and applicable machine safety standards when handling PCD inserts, as edges are extremely sharp.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Polycrystalline Diamond (PCD)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: DA2200\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Shape\u003c\/strong\u003e: Diamond (55 degrees)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: NF-DNMX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eANSI Code\u003c\/strong\u003e: NFDNMX432\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eISO Code\u003c\/strong\u003e: NF-DNMX150408\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInscribed Circle\u003c\/strong\u003e: 0.5 inches (12.70 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Thickness\u003c\/strong\u003e: 0.1875 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.0313 inches (1\/32 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Length\u003c\/strong\u003e: 0.2283 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Diameter\u003c\/strong\u003e: 0.2030 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelief Angle\u003c\/strong\u003e: 0 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRake\u003c\/strong\u003e: Positive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChip Breaker\u003c\/strong\u003e: X\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance Code\u003c\/strong\u003e: N\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTolerance Code\u003c\/strong\u003e: M\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Clamp and Pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Non-Ferrous Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: C2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI and ISO 13399\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.2 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SUMITOMO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 16CDBCD\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SUMITOMO","offers":[{"title":"Default Title","offer_id":51730028134706,"sku":"16CDBCD","price":102.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/79f4a88fcf3190b189fdfa993a42aece.jpg?v=1788710447","url":"https:\/\/voomisupply.com\/products\/sumitomo-16cdbcd-pcd-turning-insert-0-5in-55-degree-diamond","provider":"Voomi Supply","version":"1.0","type":"link"}