{"product_id":"starrett-56960-o1-tool-steel-flat-stock-3-16x1x18-in","title":"Starrett 56960 O1 Tool Steel Flat Stock 3\/16x1x18 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe STARRETT 56960 is an O1 oil-hardening tool steel flat stock bar measuring 3\/16 inches thick, 1 inch wide, and 18 inches long. Manufactured to AISI Type O1 specifications, this flat stock is produced from tool steel and is intended for use in toolmaking, die work, jig and fixture fabrication, and precision machining applications. The 56960 ships in its pre-hardened annealed state, ready for machining, grinding, and final heat treating by the end user. Thickness and width tolerances are held to +0.0100 to +0.0150 inches, and length tolerance is +0.2500 inches. Squareness is controlled to 0.003 inches per inch on all edges, making this stock suitable for close-tolerance work.\u003c\/p\u003e\n\u003cp\u003eThis flat stock is suited for machine shops, tool and die makers, mold makers, and maintenance shops that require consistent, machinable tool steel in small quantities. It is appropriate for fabricating punches, dies, blades, gauges, and similar tooling components. The 18-inch length and 1-inch width make it practical for single-piece tooling blanks as well as multiple shorter components cut from one bar. It is available in single-piece quantities, making it accessible for prototype and short-run work as well as production restocking.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eAISI Type O1 oil-hardening tool steel — machines well in the annealed state and responds predictably to oil-quench heat treatment\u003c\/li\u003e\n  \u003cli\u003eThickness tolerance of +0.0100 to +0.0150 inches for consistent stock removal during grinding or machining\u003c\/li\u003e\n  \u003cli\u003eWidth tolerance of +0.0100 to +0.0150 inches held across the full length\u003c\/li\u003e\n  \u003cli\u003eSquareness controlled to 0.003 inches per inch on all edges for reliable reference surfaces\u003c\/li\u003e\n  \u003cli\u003eLength tolerance of +0.2500 inches provides adequate material for facing and squaring operations\u003c\/li\u003e\n  \u003cli\u003eWeight of 0.96 pounds per piece\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a standard O1 oil-hardening tool steel flat stock suitable for general toolmaking, die making, and precision fixture fabrication wherever AISI Type O1 material is specified.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eThis material is supplied in the annealed condition and should be machined or ground to final dimensions before heat treatment. Oil-hardening heat treatment should be performed by qualified personnel following established metallurgical procedures for AISI Type O1 tool steel. Appropriate personal protective equipment and ventilation are required during any grinding, machining, or heat-treating operations. Always inspect stock for straightness before beginning layout to ensure accurate finished dimensions.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Tool Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Specification\u003c\/strong\u003e: AISI Type O1 Oil Hardening\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThickness\u003c\/strong\u003e: 3\/16 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 18 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThickness Tolerance\u003c\/strong\u003e: +0.0100 to +0.0150 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth Tolerance\u003c\/strong\u003e: +0.0100 to +0.0150 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Tolerance\u003c\/strong\u003e: +0.2500 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSquareness\u003c\/strong\u003e: 0.003 inches per inch on all edges\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.96 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 31231200\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: STARRETT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 56960\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"STARRETT","offers":[{"title":"Default Title","offer_id":51539130515762,"sku":"56960","price":105.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/6555d28ffd7e02d6cc316d25961d7428_6672b5d9-7340-4aac-86c9-61e2dce7edbf.jpg?v=1785835091","url":"https:\/\/voomisupply.com\/products\/starrett-56960-o1-tool-steel-flat-stock-3-16x1x18-in","provider":"Voomi Supply","version":"1.0","type":"link"}