{"product_id":"starrett-54968-low-carbon-steel-flat-stock-c1018","title":"Starrett 54968 Low Carbon Steel Flat Stock C1018","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe STARRETT 54968 is a low carbon steel flat stock bar cut to 24 inches in length, 1-1\/4 inches wide, and 3\/8 inch thick. It is produced to AISI Type C1018 material specification, a widely used low carbon steel grade valued for its machinability, weldability, and consistent mechanical properties. This flat stock is held to tight dimensional tolerances — thickness and squareness are controlled to plus or minus 0.001 inch, and width tolerance is held to plus 0.000 to 0.005 inch. Machinists, fabricators, maintenance technicians, and millwrights use this stock for brackets, guides, spacers, wear plates, and general fabrication work in industrial and commercial settings.\u003c\/p\u003e\n\u003cp\u003eThis flat bar is suited for light to medium fabrication applications where a readily machinable, weldable steel is required. Typical uses include custom brackets, shims, reinforcement plates, slide components, and tool fixtures. The C1018 specification makes it compatible with common machining operations including drilling, tapping, milling, and turning without special tooling. It is appropriate for applications that do not require high hardness or heat treatment. The piece weight of approximately 3.18 pounds makes it manageable for bench and floor work.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eAISI Type C1018 low carbon steel — consistent machinability and weldability\u003c\/li\u003e\n  \u003cli\u003eThickness and squareness tolerance of plus or minus 0.001 inch for precise fitment\u003c\/li\u003e\n  \u003cli\u003eWidth tolerance of plus 0.000 to 0.005 inch — suitable for close-tolerance work\u003c\/li\u003e\n  \u003cli\u003eLength tolerance of plus 0.625 inch allows for face-cutting to final dimension\u003c\/li\u003e\n  \u003cli\u003e24 x 1-1\/4 x 3\/8 inch cut size — ready for layout and machining without further sawing\u003c\/li\u003e\n  \u003cli\u003eWeighs 3.18 pounds — practical for single-person handling at the bench or machine\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a general-purpose C1018 low carbon steel flat bar for fabrication, maintenance repair, and machine shop applications where AISI C1018 material specification is required.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eHandle cut steel stock with appropriate gloves to avoid burrs on edges and ends. Deburr all machined and cut surfaces before final assembly or installation in moving assemblies. Welding C1018 steel typically requires no preheat at this thickness, but follow applicable AWS D1.1 structural welding guidelines for the specific application. Verify final dimensions against your print before machining, as the plus 0.625 inch length tolerance means the received piece may be slightly longer than 24 inches.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Specification\u003c\/strong\u003e: AISI Type C1018 Low Carbon Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 24 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Width\u003c\/strong\u003e: 1-1\/4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Thickness\u003c\/strong\u003e: 3\/8 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Tolerance\u003c\/strong\u003e: plus 0.625 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth Tolerance\u003c\/strong\u003e: plus 0.000 to 0.005 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThickness Tolerance\u003c\/strong\u003e: plus or minus 0.001 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSquare Tolerance\u003c\/strong\u003e: plus or minus 0.001 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 3.18 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 31231200\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: STARRETT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 54968\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"STARRETT","offers":[{"title":"Default Title","offer_id":51540642660658,"sku":"54968","price":141.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/4d5ffb3ae28a26f46e95460f2f70f3a2_990119d5-18ca-4099-ab93-943f596dc7a1.jpg?v=1785860738","url":"https:\/\/voomisupply.com\/products\/starrett-54968-low-carbon-steel-flat-stock-c1018","provider":"Voomi Supply","version":"1.0","type":"link"}