{"product_id":"starrett-54930-low-carbon-steel-flat-stock-3-16x4x24-in","title":"Starrett 54930 Low Carbon Steel Flat Stock 3\/16x4x24 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe STARRETT 54930 is a low carbon steel flat stock bar measuring 3\/16 inch thick by 4 inches wide by 24 inches long, manufactured to AISI Type C1018 material specification. This mill-finish flat bar is used in fabrication, maintenance, and repair applications where a weldable, machinable low carbon steel stock is required. Thickness and squareness are held to a tolerance of plus or minus 0.001 inches, and width tolerance runs plus 0.000 to 0.005 inches, making it suitable for layout work and precision fit-up. Weight is 5.1 pounds per piece. Machinists, fabricators, millwrights, and maintenance technicians are the typical end users.\u003c\/p\u003e\n\u003cp\u003eThis flat stock is suited for general industrial and commercial fabrication tasks including brackets, supports, spacers, shims, and structural repair stock. The C1018 specification indicates a low carbon content that supports welding with standard MIG or stick processes and responds well to drilling, tapping, and grinding without special tooling. At 24 inches in length and 4 inches wide, this piece is practical for bench work and short-run fabrication without the need to cut down larger stock.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eAISI Type C1018 low carbon steel — weldable and machinable without special preparation\u003c\/li\u003e\n  \u003cli\u003eThickness tolerance of plus or minus 0.001 inches for precision fit-up\u003c\/li\u003e\n  \u003cli\u003eWidth tolerance of plus 0.000 to 0.005 inches\u003c\/li\u003e\n  \u003cli\u003eLength tolerance of plus 0.625 inches\u003c\/li\u003e\n  \u003cli\u003eSquareness tolerance of plus or minus 0.001 inches\u003c\/li\u003e\n  \u003cli\u003e5.1 pounds per piece — manageable for single-technician bench work\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a standard-dimension C1018 low carbon steel flat bar suitable for general fabrication, maintenance repair, and OEM replacement stock applications across industrial and commercial settings.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eCutting, drilling, and welding should be performed by qualified fabricators or maintenance technicians following applicable shop safety procedures. Wear appropriate PPE including eye protection and gloves when cutting or grinding. Deburr all cut edges before handling or installing in any assembly. Consult applicable structural or welding codes when incorporating flat stock into load-bearing applications.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Specification\u003c\/strong\u003e: AISI Type C1018 Low Carbon Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Thickness\u003c\/strong\u003e: 3\/16 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Width\u003c\/strong\u003e: 4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 24 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThickness Tolerance\u003c\/strong\u003e: plus or minus 0.001 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth Tolerance\u003c\/strong\u003e: plus 0.000 to 0.005 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Tolerance\u003c\/strong\u003e: plus 0.625 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSquare Tolerance\u003c\/strong\u003e: plus or minus 0.001 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 5.1 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 31231200\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: STARRETT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 54930\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"STARRETT","offers":[{"title":"Default Title","offer_id":51542460891442,"sku":"54930","price":313.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/4d5ffb3ae28a26f46e95460f2f70f3a2_14d94174-25a9-4d90-b257-e88e21eb08c7.jpg?v=1785901035","url":"https:\/\/voomisupply.com\/products\/starrett-54930-low-carbon-steel-flat-stock-3-16x4x24-in","provider":"Voomi Supply","version":"1.0","type":"link"}