{"product_id":"starrett-54922-low-carbon-steel-flat-stock-24x3-4x3-16-in","title":"Starrett 54922 Low Carbon Steel Flat Stock 24x3\/4x3\/16 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe STARRETT 54922 is a low carbon steel flat stock bar made to AISI Type C1018 material specification. It measures 24 inches long, 3\/4 inch wide, and 3\/16 inch thick, with tightly controlled tolerances suited to precision fabrication and toolroom work. Length tolerance is plus 0.625 inches, width tolerance is plus 0.000 to 0.005 inches, and both thickness and squareness tolerances hold to plus or minus 0.001 inches. The part ships as a single piece and is used by machinists, fabricators, millwrights, and maintenance technicians who require a predictable, machinable steel bar for fixturing, brackets, keys, and general metalwork.\u003c\/p\u003e\u003cp\u003eC1018 low carbon steel is a standard choice for applications that require moderate strength, good machinability, and easy welding without extensive pre- or post-heat treatment. This flat bar is suited to light structural fabrication, maintenance and repair operations, and shop-made tooling components. The tight width and thickness tolerances make it a reliable starting point when close finished dimensions are required with minimal stock removal.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eAISI Type C1018 low carbon steel — good machinability and weldability\u003c\/li\u003e\n\u003cli\u003eThickness and squareness tolerances held to plus or minus 0.001 inches\u003c\/li\u003e\n\u003cli\u003eWidth tolerance of plus 0.000 to 0.005 inches for consistent finished sizing\u003c\/li\u003e\n\u003cli\u003eLength tolerance of plus 0.625 inches provides material for facing or cutoff\u003c\/li\u003e\n\u003cli\u003eSingle-piece packaging with no minimum order beyond one unit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a general-purpose C1018 low carbon steel flat bar for use in fabrication, maintenance, and toolroom applications where AISI C1018 material specification is required.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eThis flat stock is a raw material bar and does not require installation in the conventional sense. Cutting, drilling, and grinding should be performed with tooling rated for low carbon steel. Standard shop safety practices apply, including eye and hand protection during machining operations. Verify final dimensions after any cutting or surface preparation before fitting to an assembly.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Specification\u003c\/strong\u003e: AISI Type C1018 Low Carbon Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 24 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Width\u003c\/strong\u003e: 3\/4 inch (0.750 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Thickness\u003c\/strong\u003e: 3\/16 inch (0.1875 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Tolerance\u003c\/strong\u003e: plus 0.625 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth Tolerance\u003c\/strong\u003e: plus 0.000 to 0.005 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness Tolerance\u003c\/strong\u003e: plus or minus 0.001 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSquare Tolerance\u003c\/strong\u003e: plus or minus 0.001 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.96 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 31231200\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: STARRETT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 54922\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"STARRETT","offers":[{"title":"Default Title","offer_id":51544169513266,"sku":"54922","price":86.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/4d5ffb3ae28a26f46e95460f2f70f3a2_3e6293c6-e2be-46df-826a-abd537333b1e.jpg?v=1785925134","url":"https:\/\/voomisupply.com\/products\/starrett-54922-low-carbon-steel-flat-stock-24x3-4x3-16-in","provider":"Voomi Supply","version":"1.0","type":"link"}