{"product_id":"starrett-54794-a2-tool-steel-flat-stock-1x5x18-in","title":"Starrett 54794 A2 Tool Steel Flat Stock 1x5x18 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe STARRETT 54794 is an A2 air-hardening tool steel flat stock bar measuring 1 inch thick, 5 inches wide, and 18 inches long. A2 tool steel is an air-hardening, cold-work die steel known for its dimensional stability during heat treat and its balance of toughness and wear resistance. This flat stock is ground to tight tolerances — plus or minus 0.001 inch on thickness and squareness — making it suitable for toolmakers, die makers, and machinists who need a reliable starting blank for punches, dies, gauges, and precision tooling components.\u003c\/p\u003e\u003cp\u003eA2 flat stock in this size range is commonly used in tool and die shops, precision machining operations, and maintenance departments where custom tooling is fabricated in-house. The 1 inch by 5 inch cross section provides substantial material for milling, grinding, or EDM work into finished tooling. The 18-inch length allows multiple blanks to be cut from a single piece. This stock is appropriate for applications where moderate impact resistance and good wear life after hardening are required, such as forming dies, trim dies, and fixture components.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eAISI A2 air-hardening tool steel for dimensional stability during heat treatment\u003c\/li\u003e\n\u003cli\u003eGround flat stock with plus or minus 0.001 inch thickness tolerance\u003c\/li\u003e\n\u003cli\u003ePlus or minus 0.001 inch squareness tolerance for accurate layout and machining\u003c\/li\u003e\n\u003cli\u003eWidth tolerance of plus 0.000 to 0.005 inch\u003c\/li\u003e\n\u003cli\u003eLength tolerance of plus 0.250 inch to allow for cutoff\u003c\/li\u003e\n\u003cli\u003eReady-to-machine starting blank for dies, punches, gauges, and precision tooling\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a standard A2 air-hardening tool steel flat stock blank suitable for general tool and die fabrication, fixture building, and precision machining applications requiring AISI A2 material specification.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eA2 tool steel flat stock is worked by qualified toolmakers and machinists using conventional milling, grinding, and EDM equipment. Material should be stress-relieved or annealed before machining if required by the application. Heat treatment to harden A2 steel should be performed by a qualified heat treater following established procedures for AISI A2 tool steel. Always follow proper machine shop safety practices and wear appropriate PPE when cutting or grinding tool steel stock.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Tool Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Specification\u003c\/strong\u003e: AISI A2 Air-Hardening\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Thickness\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Width\u003c\/strong\u003e: 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 18 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness Tolerance\u003c\/strong\u003e: plus or minus 0.001 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth Tolerance\u003c\/strong\u003e: plus 0.000 to 0.005 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Tolerance\u003c\/strong\u003e: plus 0.250 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSquare Tolerance\u003c\/strong\u003e: plus or minus 0.001 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 25.28 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 31231200\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: STARRETT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 54794\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"STARRETT","offers":[{"title":"Default Title","offer_id":51544640454962,"sku":"54794","price":1207.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/dd4885fbdd426ecb0fa6c3cc24fba2db_6c1d1e54-8b26-4cbc-bc55-9521283a1fa2.jpg?v=1785932308","url":"https:\/\/voomisupply.com\/products\/starrett-54794-a2-tool-steel-flat-stock-1x5x18-in","provider":"Voomi Supply","version":"1.0","type":"link"}