{"product_id":"starrett-54784-a2-tool-steel-flat-stock-7-8-x-3-x-18-in","title":"Starrett 54784 A2 Tool Steel Flat Stock 7\/8 X 3 X 18 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe STARRETT 54784 is an A2 air-hardening tool steel flat stock bar cut to 7\/8 inch thick, 3 inches wide, and 18 inches long. A2 tool steel offers good wear resistance, dimensional stability during heat treatment, and moderate toughness, making it a widely used material for dies, punches, gauges, and cutting tools. This flat stock ships in a precision-ground, ready-to-machine condition with tight tolerances held across thickness, width, and length. Machinists, tool and die makers, and industrial maintenance professionals work with this stock when fabricating or repairing tooling that will be air-hardened in service.\u003c\/p\u003e\u003cp\u003eThis flat stock is suited for job-shop and production tooling applications where reliable dimensional accuracy is required before and after heat treat. Common uses include blanking dies, forming punches, master plates, and precision gauging components. The A2 specification ensures predictable through-hardening with minimal distortion during air-quench cycles, which reduces post-heat-treat grinding allowances and saves setup time on surface grinders and mill machines.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eAISI A2 air-hardening tool steel for predictable heat treat results with minimal distortion\u003c\/li\u003e\n\u003cli\u003ePrecision-ground flat stock held to +\/- 0.001 inch thickness tolerance\u003c\/li\u003e\n\u003cli\u003eWidth tolerance of +0.000 to +0.005 inch for consistent fit in close-tolerance tooling\u003c\/li\u003e\n\u003cli\u003eLength tolerance of +0.250 inch provides machining stock for square-cut finishing\u003c\/li\u003e\n\u003cli\u003eSquare tolerance of +\/- 0.001 inch supports accurate layout and fixturing\u003c\/li\u003e\n\u003cli\u003eReady-to-machine condition reduces prep time at the surface grinder or mill\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a standard AISI A2 air-hardening tool steel flat stock suitable for fabrication of dies, punches, gauges, and general tooling components where air-quench hardening is specified.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eWork with this material using standard tool steel machining practices — carbide tooling is recommended for milling and drilling operations. Heat treatment should be performed by a qualified heat treater following established A2 air-hardening procedures per the material specification. Always allow the stock to reach ambient temperature before performing final precision grinding. Inspect dimensions and squareness after heat treat before final grinding to finished size.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: A2 Tool Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Specification\u003c\/strong\u003e: AISI Type A2 Air-Hardening\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness\u003c\/strong\u003e: 0.875 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 18 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness Tolerance\u003c\/strong\u003e: +\/- 0.001 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth Tolerance\u003c\/strong\u003e: +0.000 to +0.005 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Tolerance\u003c\/strong\u003e: +0.250 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSquare Tolerance\u003c\/strong\u003e: +\/- 0.001 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 13.35 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 31231200\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: STARRETT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 54784\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"STARRETT","offers":[{"title":"Default Title","offer_id":51541514191154,"sku":"54784","price":710.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/dd4885fbdd426ecb0fa6c3cc24fba2db_9713aaa6-db94-4b4e-8d57-715474f1a6e2.jpg?v=1785878003","url":"https:\/\/voomisupply.com\/products\/starrett-54784-a2-tool-steel-flat-stock-7-8-x-3-x-18-in","provider":"Voomi Supply","version":"1.0","type":"link"}