{"product_id":"starrett-54617-a2-tool-steel-flat-stock-3-16x4x18-in","title":"Starrett 54617 A2 Tool Steel Flat Stock 3\/16x4x18 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe STARRETT 54617 is an A2 air-hardening tool steel flat stock bar used in toolmaking, die work, and precision machining applications. It ships in an annealed condition and is ready for machining before hardening in air. At 3\/16 inches thick, 4 inches wide, and 18 inches long, this flat stock is sized for moderate tooling projects and component blanks. Dimensional tolerances are held to tight standards: thickness tolerance of plus or minus 0.001 inches, width tolerance of plus 0.000 to 0.005 inches, and a length tolerance of plus 0.250 inches. These specs make it suitable where close-tolerance stock is required before final grinding or heat treating.\u003c\/p\u003e\u003cp\u003eA2 tool steel is a widely used air-hardening alloy valued for its dimensional stability during heat treatment and its balance of wear resistance and toughness. This flat stock is appropriate for blanks, punches, dies, gauges, and similar toolroom components in both job shop and production environments. Machinists, tool and die makers, and industrial maintenance technicians typically work with this material. It is commonly used in applications where repeatability of hardened dimensions is critical and where oil-hardening grades may introduce unacceptable distortion.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eA2 air-hardening tool steel per AISI designation — excellent dimensional stability during hardening\u003c\/li\u003e\n\u003cli\u003eThickness: 3\/16 inches with plus or minus 0.001-inch tolerance\u003c\/li\u003e\n\u003cli\u003eWidth: 4 inches with plus 0.000 to 0.005-inch tolerance\u003c\/li\u003e\n\u003cli\u003eLength: 18 inches with plus 0.250-inch tolerance\u003c\/li\u003e\n\u003cli\u003eSquare tolerance held to plus or minus 0.001 inches\u003c\/li\u003e\n\u003cli\u003eShips as a single piece — no minimum beyond one unit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a general-purpose A2 tool steel flat stock blank suitable for toolroom machining, die making, punch fabrication, and gauge work where air-hardening alloy tool steel is specified.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eMachining of A2 tool steel flat stock should be performed in the annealed condition prior to heat treatment. Heat treating and hardening operations should be carried out by qualified personnel following established metallurgical procedures for A2 alloy tool steel. Appropriate personal protective equipment and ventilation are required during grinding and machining. Refer to the material supplier data sheet and applicable shop safety standards before processing.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Tool Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Specification\u003c\/strong\u003e: AISI A2 Air-Hardening\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness\u003c\/strong\u003e: 3\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 18 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness Tolerance\u003c\/strong\u003e: plus or minus 0.001 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth Tolerance\u003c\/strong\u003e: plus 0.000 to 0.005 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Tolerance\u003c\/strong\u003e: plus 0.250 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSquare Tolerance\u003c\/strong\u003e: plus or minus 0.001 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 3.82 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 31231200\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: STARRETT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 54617\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"STARRETT","offers":[{"title":"Default Title","offer_id":51543094395186,"sku":"54617","price":293.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/dd4885fbdd426ecb0fa6c3cc24fba2db_ad583899-0b85-444d-b9a0-798fee6b9cc4.jpg?v=1785915327","url":"https:\/\/voomisupply.com\/products\/starrett-54617-a2-tool-steel-flat-stock-3-16x4x18-in","provider":"Voomi Supply","version":"1.0","type":"link"}