{"product_id":"starrett-54542-o1-tool-steel-flat-stock-2x6x36-in","title":"Starrett 54542 O1 Tool Steel Flat Stock 2x6x36 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe STARRETT 54542 is a precision-ground O1 oil-hardening tool steel flat stock bar measuring 2 inches thick, 6 inches wide, and 36 inches long. O1 is an oil-hardening cold-work tool steel prized for its dimensional stability during heat treat, good machinability in the annealed state, and strong wear resistance after hardening. This flat stock is manufactured to tight tolerances — thickness held to plus or minus 0.001 inches — making it suitable for toolmakers, die makers, and machinists who need reliable stock for dies, punches, gauges, and fixtures. At 121.4 pounds, this is a heavy-section bar intended for industrial toolroom and production applications.\u003c\/p\u003e\n\u003cp\u003eO1 flat stock in this size range is commonly used in toolrooms, job shops, and manufacturing facilities where large dies, mold components, or custom tooling require a through-hardenable steel with predictable heat-treat response. The 2-inch thickness and 6-inch width provide sufficient material for roughing out large die blocks, wear plates, and forming tools. Machinists typically machine the part to near-net shape in the annealed condition before sending out for oil-quench hardening and tempering. This bar is appropriate for both prototype and production tooling environments.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eAISI Type O1 oil-hardening tool steel — stable geometry through heat treat cycle\u003c\/li\u003e\n  \u003cli\u003eThickness tolerance of plus or minus 0.001 inches for consistent stock removal planning\u003c\/li\u003e\n  \u003cli\u003eLength tolerance of plus 0.015 inches, minus 0 inches — full usable length guaranteed\u003c\/li\u003e\n  \u003cli\u003eWidth tolerance of 0.000 to minus 0.005 inches — held to tight minus-only band\u003c\/li\u003e\n  \u003cli\u003eSquareness: all edges held to 0.003 inches per inch\u003c\/li\u003e\n  \u003cli\u003eHeavy section bar at 121.4 pounds — suitable for large die blocks and wear components\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a standard AISI O1 oil-hardening tool steel flat stock for toolroom, die-making, and machining applications where an oil-quench hardenable cold-work steel is specified.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eMachining and handling of large tool steel flat stock should be performed by qualified toolmakers or machinists using appropriate lifting equipment given the 121.4-pound bar weight. Machine in the annealed condition before heat treatment. Heat treating O1 steel requires oil quenching and tempering by a qualified heat treat facility following applicable metallurgical procedures — do not attempt to alter heat treat parameters without proper equipment and process controls. Inspect dimensions after heat treat as minor distortion may occur on large cross-sections.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Tool Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Specification\u003c\/strong\u003e: AISI Type O1 Oil Hardening\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Thickness\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Width\u003c\/strong\u003e: 6 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 36 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThickness Tolerance\u003c\/strong\u003e: plus or minus 0.001 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth Tolerance\u003c\/strong\u003e: 0.000 to minus 0.005 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Tolerance\u003c\/strong\u003e: plus 0.015 inches, minus 0 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSquareness\u003c\/strong\u003e: Edge: All 0.003 inches per inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 121.4 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 31231200\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: STARRETT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 54542\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"STARRETT","offers":[{"title":"Default Title","offer_id":51538396217650,"sku":"54542","price":2859.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/6555d28ffd7e02d6cc316d25961d7428_f8b4334e-7867-4619-bb61-5f1656aec44a.jpg?v=1785824431","url":"https:\/\/voomisupply.com\/products\/starrett-54542-o1-tool-steel-flat-stock-2x6x36-in","provider":"Voomi Supply","version":"1.0","type":"link"}