{"product_id":"starrett-54469-o1-tool-steel-flat-stock-5-8x3-5x36-in","title":"Starrett 54469 O1 Tool Steel Flat Stock 5\/8x3.5x36 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe STARRETT 54469 is an O1 oil-hardening tool steel flat stock bar sized at 5\/8 inch thick, 3-1\/2 inches wide, and 36 inches long. Manufactured to AISI Type O1 specification, this flat stock is designed for toolmakers, machinists, and die makers who need a reliable, machinable blank that responds well to oil-quench heat treatment. Thickness and squareness tolerances are held to plus or minus 0.001 inches, making it suitable for precision tool and die work where dimensional accuracy before hardening is critical. At 22.32 pounds, it is a substantial bar suited to heavy tooling applications.\u003c\/p\u003e\u003cp\u003eO1 tool steel flat stock is used in the fabrication of cutting tools, punches, dies, gauges, and fixtures across job shops, tool rooms, and manufacturing facilities. This bar is typically cut, machined, and ground to final geometry before being oil-hardened and tempered by the end user. The 36-inch length provides sufficient stock for multiple tool blanks from a single piece, reducing scrap and setup time.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eAISI Type O1 oil-hardening tool steel for predictable heat-treat response\u003c\/li\u003e\n\u003cli\u003eThickness tolerance held to plus or minus 0.001 inches for precision blanks\u003c\/li\u003e\n\u003cli\u003eWidth tolerance of 0.000 to minus 0.005 inches for consistent fit in fixtures\u003c\/li\u003e\n\u003cli\u003eLength tolerance of plus 0.015 inches, minus 0 inches\u003c\/li\u003e\n\u003cli\u003eSquareness: edge held to 0.003 inches per inch on all edges\u003c\/li\u003e\n\u003cli\u003e36-inch length yields multiple tool blanks from a single bar\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a general-purpose O1 tool steel flat stock blank suitable for use in tool and die, punch and die, gauge, and fixture fabrication applications requiring oil-hardening tool steel.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eMachining and cutting of tool steel flat stock should be performed with appropriate carbide or high-speed steel tooling rated for tool steel alloys. Follow all shop safety practices when sawing or grinding. Heat treatment, including oil quenching and tempering, should be performed by qualified personnel following established metallurgical procedures for AISI O1 tool steel. Allow the bar to reach ambient temperature before performing finish grinding after heat treatment to avoid dimensional errors.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Tool Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Specification\u003c\/strong\u003e: AISI Type O1 Oil Hardening\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness\u003c\/strong\u003e: 5\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 3-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 36 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness Tolerance\u003c\/strong\u003e: plus or minus 0.001 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth Tolerance\u003c\/strong\u003e: 0.000 to minus 0.005 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Tolerance\u003c\/strong\u003e: plus 0.015 inches, minus 0 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSquareness\u003c\/strong\u003e: Edge: All 0.003 inches per inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 22.32 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 31231200\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: STARRETT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 54469\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"STARRETT","offers":[{"title":"Default Title","offer_id":51544198578482,"sku":"54469","price":740.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/6555d28ffd7e02d6cc316d25961d7428_af5fb783-ee40-4347-9bf3-4c816c292a1f.jpg?v=1785925582","url":"https:\/\/voomisupply.com\/products\/starrett-54469-o1-tool-steel-flat-stock-5-8x3-5x36-in","provider":"Voomi Supply","version":"1.0","type":"link"}