{"product_id":"starrett-54413-o1-tool-steel-flat-stock-3-8x2x36-in","title":"Starrett 54413 O1 Tool Steel Flat Stock 3\/8x2x36 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe STARRETT 54413 is an O1 oil-hardening tool steel flat stock bar measuring 3\/8 inch thick, 2 inches wide, and 36 inches long. Made from AISI Type O1 tool steel, it is supplied in the annealed (soft) condition and ready for machining before hardening. O1 is a general-purpose oil-hardening grade prized for its fine machinability, good wear resistance after heat treatment, and dimensional stability. This stock is held to tight tolerances: thickness and squareness are controlled to plus or minus 0.001 inches, making it well suited for precision toolroom applications. It weighs approximately 7.65 pounds per bar. Licensed tool and die makers, machinists, and toolroom technicians are the primary users of this material.\u003c\/p\u003e\u003cp\u003eO1 flat stock at these dimensions is commonly used to fabricate punches, dies, gauges, cutting tools, jigs, and fixtures in toolroom and job shop environments. The 36-inch length provides enough stock to lay out multiple parts or cut blanks for small production runs. Its rectangular profile simplifies setup on surface grinders, mills, and lathes. Both production shops and maintenance departments working with precision tooling rely on this grade for applications where a moderate level of hardness and edge retention is required after heat treat and quench.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eAISI Type O1 oil-hardening tool steel for controlled, predictable heat treatment response\u003c\/li\u003e\n\u003cli\u003eTight thickness and squareness tolerance of plus or minus 0.001 inches for precision fitment\u003c\/li\u003e\n\u003cli\u003eWidth tolerance held to 0.000 to 0.005 inches under nominal for consistent stock removal planning\u003c\/li\u003e\n\u003cli\u003eLength tolerance of plus 0.015 inches, minus 0 inches ensures full usable length on every bar\u003c\/li\u003e\n\u003cli\u003eEdge squareness controlled to 0.003 inches per inch across all edges\u003c\/li\u003e\n\u003cli\u003e36-inch length provides versatile blank cutting for multiple toolroom applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a standard AISI O1 oil-hardening tool steel flat bar suitable for general toolroom, die-making, and precision machining applications requiring this alloy grade and stock size.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eO1 tool steel flat stock is worked by qualified machinists and tool and die makers using conventional milling, grinding, and sawing equipment. Prior to heat treatment, the material should be fully machined to near-final dimensions, leaving only finish-grinding allowance. Oil hardening requires a proper quench medium and temperature-controlled furnace — follow the material supplier heat-treat data sheet and applicable shop safety protocols for handling hot tooling and quench fluids. Always allow the bar to reach room temperature and stress-relieve as needed before finish grinding to final tolerance.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Tool Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Specification\u003c\/strong\u003e: AISI Type O1 Oil Hardening\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness\u003c\/strong\u003e: 3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 36 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness Tolerance\u003c\/strong\u003e: plus or minus 0.001 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth Tolerance\u003c\/strong\u003e: 0.000 to 0.005 inches under nominal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Tolerance\u003c\/strong\u003e: plus 0.015 inches, minus 0 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSquareness\u003c\/strong\u003e: Edge: all edges 0.003 inches per inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 7.65 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 31231200\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: STARRETT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 54413\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"STARRETT","offers":[{"title":"Default Title","offer_id":51539072483634,"sku":"54413","price":228.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/6555d28ffd7e02d6cc316d25961d7428_976afcf1-de5b-4c59-b388-4eaaed4995d4.jpg?v=1785834373","url":"https:\/\/voomisupply.com\/products\/starrett-54413-o1-tool-steel-flat-stock-3-8x2x36-in","provider":"Voomi Supply","version":"1.0","type":"link"}