{"product_id":"starrett-54407-o1-tool-steel-flat-stock-3-8x1-2x36-in","title":"Starrett 54407 O1 Tool Steel Flat Stock 3\/8x1\/2x36 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe STARRETT 54407 is an O1 oil-hardening tool steel flat stock bar intended for toolmakers, machinists, and die makers who require close-tolerance raw material for cutting tools, punches, dies, and fixtures. Manufactured to AISI Type O1 specifications, this flat stock measures 0.375 inches thick, 0.5 inches wide, and 36 inches long. Thickness tolerance is held to plus or minus 0.001 inches, making it suitable for applications where dimensional consistency before heat treat is critical. At 1.91 pounds per piece, the bar is manageable for bench and machine work.\u003c\/p\u003e\u003cp\u003eO1 tool steel flat stock is a standard raw material in job shops, tool and die operations, and maintenance departments. It is used to fabricate punches, blades, gauges, and custom tooling. The 36-inch length allows multiple blanks to be cut from a single bar, reducing waste. This grade is oil-quenched during hardening, which produces less distortion than water-hardening grades, making it a practical choice for small cross-section tooling components.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eAISI Type O1 oil-hardening tool steel for predictable heat treat response\u003c\/li\u003e\n\u003cli\u003eThickness tolerance of plus or minus 0.001 inches for close-tolerance blanks\u003c\/li\u003e\n\u003cli\u003eWidth tolerance of 0.000 to minus 0.005 inches\u003c\/li\u003e\n\u003cli\u003eLength tolerance of plus 0.015 inches\u003c\/li\u003e\n\u003cli\u003eEdge squareness held to 0.003 inches per inch on all edges\u003c\/li\u003e\n\u003cli\u003e36-inch bar length allows multiple blanks per piece\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a standard O1 oil-hardening tool steel flat stock suitable for general toolmaking, die making, and fixture fabrication applications where AISI Type O1 material is specified.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eMachining and grinding should be performed before hardening. Oil quenching requires appropriate personal protective equipment and a proper quench tank setup. Heat treatment should be performed by qualified personnel following established metallurgical procedures for O1 tool steel. Always follow applicable shop safety standards when cutting, grinding, or heat-treating tool steel.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Tool Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Specification\u003c\/strong\u003e: AISI Type O1 Oil Hardening\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness\u003c\/strong\u003e: 0.375 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 36 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness Tolerance\u003c\/strong\u003e: plus or minus 0.001 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth Tolerance\u003c\/strong\u003e: 0.000 to minus 0.005 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Tolerance\u003c\/strong\u003e: plus 0.015 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSquareness\u003c\/strong\u003e: Edge: All 0.003 inches per inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.91 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 31231200\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: STARRETT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 54407\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"STARRETT","offers":[{"title":"Default Title","offer_id":51539135660338,"sku":"54407","price":165.11,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/6555d28ffd7e02d6cc316d25961d7428_d33a5e94-9b04-42dc-9c38-d3b6af4dccaf.jpg?v=1785835153","url":"https:\/\/voomisupply.com\/products\/starrett-54407-o1-tool-steel-flat-stock-3-8x1-2x36-in","provider":"Voomi Supply","version":"1.0","type":"link"}