{"product_id":"starrett-54188-o1-tool-steel-flat-stock-3-4x1x18-in","title":"Starrett 54188 O1 Tool Steel Flat Stock 3\/4x1x18 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe STARRETT 54188 is an O1 oil-hardening tool steel flat stock bar intended for toolmakers, machinists, and die makers who require close-tolerance, ready-to-use steel in a workable pre-hardened blank format. Measuring 0.75 inches thick, 1 inch wide, and 18 inches long, this flat stock is manufactured to AISI Type O1 material specification. Thickness tolerance is held to plus or minus 0.001 inches, and width tolerance runs from 0.000 to 0.005 inches. O1 tool steel machines well in the annealed state and responds predictably to oil quench hardening, making it a standard choice for punches, dies, gauges, and cutting tools.\u003c\/p\u003e\u003cp\u003eThis flat stock is suited to tool and die shops, maintenance machining operations, and industrial fabrication environments where precision blanks are needed without extensive pre-machining. The 18-inch length provides usable stock for multiple smaller tool components from a single piece. Its square edges and close thickness tolerances reduce setup time on surface grinders and milling machines. Edge squareness is held to 0.003 inches per inch across all edges.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eAISI Type O1 oil-hardening tool steel — machines clean in annealed state, hardens predictably with oil quench\u003c\/li\u003e\n\u003cli\u003eThickness tolerance: plus or minus 0.001 inches for consistent grinding stock allowance\u003c\/li\u003e\n\u003cli\u003eWidth tolerance: 0.000 to 0.005 inches for predictable fit in tooling applications\u003c\/li\u003e\n\u003cli\u003eLength tolerance: plus 0.250 inches, minus 0 inches — stock is never short\u003c\/li\u003e\n\u003cli\u003eEdge squareness: 0.003 inches per inch on all edges\u003c\/li\u003e\n\u003cli\u003eSingle-piece packaging suitable for low-volume toolroom procurement\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a standard O1 oil-hardening tool steel flat stock blank for use in toolroom, die making, and precision machining applications where AISI Type O1 material specification is required.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eO1 tool steel flat stock is typically cut, milled, and ground by machinists or tool and die makers using conventional metalworking equipment. When heat treating, follow the oil quench hardening and tempering procedure appropriate for AISI O1 as published by the material supplier — do not substitute water quench. Wear appropriate PPE during cutting and grinding operations. Consult applicable shop safety standards before performing any heat treatment.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Tool Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Specification\u003c\/strong\u003e: AISI Type O1 Oil Hardening\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness\u003c\/strong\u003e: 0.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 18 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness Tolerance\u003c\/strong\u003e: plus or minus 0.001 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth Tolerance\u003c\/strong\u003e: 0.000 to 0.005 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Tolerance\u003c\/strong\u003e: plus 0.250 inches, minus 0 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEdge Squareness\u003c\/strong\u003e: 0.003 inches per inch on all edges\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 3.82 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: STARRETT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 54188\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"STARRETT","offers":[{"title":"Default Title","offer_id":51538298208562,"sku":"54188","price":219.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/6555d28ffd7e02d6cc316d25961d7428_5711e67a-be86-40e2-b353-35edb6bf4001.jpg?v=1785822212","url":"https:\/\/voomisupply.com\/products\/starrett-54188-o1-tool-steel-flat-stock-3-4x1x18-in","provider":"Voomi Supply","version":"1.0","type":"link"}