{"product_id":"starrett-54144-o1-tool-steel-flat-stock-7-16x3x18-in","title":"Starrett 54144 O1 Tool Steel Flat Stock 7\/16x3x18 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe STARRETT 54144 is an O1 oil-hardening tool steel flat stock bar used in toolmaking, die work, punches, gauges, and precision machined components. Ground and cut to close tolerances, this flat stock is supplied in the annealed condition and is intended to be hardened by the installer through an oil-quench heat treatment process. At 7\/16 inches thick, 3 inches wide, and 18 inches long, the bar is sized for small-to-medium toolroom applications. Thickness and squareness tolerances are held to plus or minus 0.001 inches, making it suitable for applications where dimensional accuracy before hardening is critical. The piece weighs approximately 6.69 pounds.\u003c\/p\u003e\u003cp\u003eThis flat stock is appropriate for job shops, tool-and-die operations, and machine shops requiring reliable pre-cut O1 stock. O1 tool steel is widely used in production of blanking dies, forming tools, drill jigs, and cutting blades where moderate toughness and good machinability in the annealed state are required. Because the stock is supplied annealed, it can be machined, ground, or filed before hardening. It is suited to low-to-medium production tooling environments rather than high-speed or high-heat applications.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eAISI Type O1 oil-hardening tool steel in annealed flat stock form\u003c\/li\u003e\n\u003cli\u003eThickness tolerance of plus or minus 0.001 inches for tight pre-hardening fitment\u003c\/li\u003e\n\u003cli\u003eWidth tolerance of 0.000 to negative 0.005 inches\u003c\/li\u003e\n\u003cli\u003eLength tolerance of plus 0.250 inches, minus 0\u003c\/li\u003e\n\u003cli\u003eSquareness held to 0.003 inches per inch on all edges\u003c\/li\u003e\n\u003cli\u003eReady to machine, grind, or shape before oil-quench hardening\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a standard O1 oil-hardening tool steel flat stock for general toolroom and die-making applications requiring AISI Type O1 material specification.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eMachining and grinding of O1 tool steel flat stock should be performed in the annealed condition prior to heat treatment. Heat treating and oil quenching must be carried out by qualified personnel following appropriate metallurgical procedures and applicable shop safety standards. Secure the workpiece properly during all cutting and grinding operations. Do not attempt to machine or grind the stock after hardening without appropriate CBN or grinding wheel tooling.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Tool Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Specification\u003c\/strong\u003e: AISI Type O1 Oil Hardening\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness\u003c\/strong\u003e: 7\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 18 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness Tolerance\u003c\/strong\u003e: plus or minus 0.001 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth Tolerance\u003c\/strong\u003e: 0.000 to negative 0.005 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Tolerance\u003c\/strong\u003e: plus 0.250 inches, minus 0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSquareness\u003c\/strong\u003e: 0.003 inches per inch on all edges\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 6.69 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 31231200\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: STARRETT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 54144\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"STARRETT","offers":[{"title":"Default Title","offer_id":51540564672818,"sku":"54144","price":294.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/6555d28ffd7e02d6cc316d25961d7428_d20c2830-460c-4026-b31c-58a1d1faaf88.jpg?v=1785858529","url":"https:\/\/voomisupply.com\/products\/starrett-54144-o1-tool-steel-flat-stock-7-16x3x18-in","provider":"Voomi Supply","version":"1.0","type":"link"}