{"product_id":"starrett-54118-o1-tool-steel-flat-stock-3-8x3-4x18in","title":"Starrett 54118 O1 Tool Steel Flat Stock 3\/8x3\/4x18in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe STARRETT 54118 is an O1 oil-hardening tool steel flat stock bar intended for toolmakers, machinists, and die makers who require close-tolerance raw material for fabricating punches, dies, gauges, jigs, and cutting tools. Manufactured to AISI Type O1 specification, this flat stock measures 3\/8 inch thick, 3\/4 inch wide, and 18 inches long, with a thickness tolerance of plus or minus 0.001 inches. O1 tool steel offers good machinability in the annealed state and responds predictably to oil-quench hardening, making it a dependable choice for shop-floor tooling applications where dimensional accuracy before hardening is critical.\u003c\/p\u003e\u003cp\u003eThis flat stock is suited for machine shops, tool and die operations, and maintenance departments that fabricate custom tooling in-house. The 18-inch length provides adequate stock for most small to medium tooling blanks without requiring initial cutoff on a band saw. The 3\/8 by 3\/4 inch cross-section is a common size for punch blanks, form tools, and small fixture components. Width tolerance runs from 0.000 to negative 0.005 inches, and length tolerance is plus 0.250 inches over nominal. Edge squareness is held to 0.003 inches per inch on all edges.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eAISI Type O1 oil-hardening tool steel for predictable heat-treat response\u003c\/li\u003e\n\u003cli\u003eThickness tolerance of plus or minus 0.001 inches for close-tolerance blanking\u003c\/li\u003e\n\u003cli\u003eWidth tolerance of 0.000 to negative 0.005 inches\u003c\/li\u003e\n\u003cli\u003eLength tolerance of plus 0.250 inches over nominal 18 inches\u003c\/li\u003e\n\u003cli\u003eEdge squareness held to 0.003 inches per inch on all edges\u003c\/li\u003e\n\u003cli\u003eShips as individual bar; minimum order quantity of 1 piece\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a general-purpose O1 tool steel flat stock blank suitable for fabrication of punches, dies, gauges, and fixture components in machine shop and tool and die environments.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eMachining and grinding should be performed in the annealed condition before hardening. Oil-quench hardening of O1 tool steel requires a qualified heat-treat process; follow AISI O1 heat-treat guidelines and applicable shop safety procedures when handling heated stock. Secure workpieces properly during all machining operations. Personal protective equipment appropriate for grinding and machining operations should be worn at all times.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Tool Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Specification\u003c\/strong\u003e: AISI Type O1 Oil Hardening\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness\u003c\/strong\u003e: 3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 18 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness Tolerance\u003c\/strong\u003e: plus or minus 0.001 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth Tolerance\u003c\/strong\u003e: 0.000 to negative 0.005 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Tolerance\u003c\/strong\u003e: plus 0.250 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSquareness\u003c\/strong\u003e: 0.003 inches per inch on all edges\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.43 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 31231200\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: STARRETT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 54118\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"STARRETT","offers":[{"title":"Default Title","offer_id":51542959030578,"sku":"54118","price":86.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/6555d28ffd7e02d6cc316d25961d7428_2c00e125-34ce-4f09-a75b-666fd0202686.jpg?v=1785912219","url":"https:\/\/voomisupply.com\/products\/starrett-54118-o1-tool-steel-flat-stock-3-8x3-4x18in","provider":"Voomi Supply","version":"1.0","type":"link"}