{"product_id":"starrett-53936-o1-tool-steel-flat-stock-1-32x1-1-4x18-in","title":"Starrett 53936 O1 Tool Steel Flat Stock 1\/32x1-1\/4x18 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe STARRETT 53936 is an O1 oil-hardening tool steel flat stock bar sized at 1\/32 inch thick, 1-1\/4 inches wide, and 18 inches long. Made from AISI Type O1 tool steel, it is produced to tight dimensional tolerances and is intended for toolmaking, die making, jig and fixture fabrication, and precision machining applications. The material arrives in the annealed (soft) condition, ready for machining, then hardened and tempered by the user through an oil-quench heat treatment process. Thickness tolerance is held to plus or minus 0.001 inches, making this stock suitable for applications where close dimensional control before heat treatment is critical.\u003c\/p\u003e\u003cp\u003eThis flat stock is used primarily in tool and die shops, machine shops, and metal fabrication environments. Typical applications include punches, dies, cutting blades, gauges, and small machine parts that require a hard, wear-resistant surface after heat treatment. Machinists and tool and die makers specify O1 tool steel flat stock when they need predictable dimensional stability through the hardening process and good machinability in the annealed state.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eAISI Type O1 oil-hardening tool steel — known for good machinability and dimensional stability during heat treatment\u003c\/li\u003e\n\u003cli\u003eThickness: 1\/32 inch with tolerance of plus or minus 0.001 inches\u003c\/li\u003e\n\u003cli\u003eWidth: 1-1\/4 inches with tolerance of 0.0000 to minus 0.0050 inches\u003c\/li\u003e\n\u003cli\u003eLength: 18 inches with tolerance of plus 0.250 inches, minus 0 inches\u003c\/li\u003e\n\u003cli\u003eEdge squareness held to 0.003 inches per inch on all edges\u003c\/li\u003e\n\u003cli\u003eSupplied in annealed condition — ready to machine prior to oil-quench hardening\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a general-purpose O1 oil-hardening tool steel flat bar for use in toolmaking, die making, and precision machining applications where oil-quench heat treatment will be applied after final machining.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eCutting, grinding, and machining of tool steel flat stock should be performed with appropriate metalworking equipment; standard woodworking or general-purpose tools are not suitable. Heat treatment of O1 steel requires controlled furnace equipment and a proper oil-quench bath — this work is typically performed by a qualified toolmaker or heat treatment specialist. Always wear appropriate personal protective equipment when machining or heat-treating tool steel. Consult applicable shop safety standards and material safety data for tool steel handling.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Tool Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Specification\u003c\/strong\u003e: AISI Type O1 Oil Hardening\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness\u003c\/strong\u003e: 1\/32 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 1-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 18 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness Tolerance\u003c\/strong\u003e: plus or minus 0.001 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth Tolerance\u003c\/strong\u003e: 0.0000 to minus 0.0050 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Tolerance\u003c\/strong\u003e: plus 0.250 inches, minus 0 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEdge Squareness\u003c\/strong\u003e: 0.003 inches per inch on all edges\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 31231200\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: STARRETT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 53936\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"STARRETT","offers":[{"title":"Default Title","offer_id":51541869756722,"sku":"53936","price":88.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/6555d28ffd7e02d6cc316d25961d7428_73aa3ee7-d565-4000-afde-9b02e4914ae4.jpg?v=1785887226","url":"https:\/\/voomisupply.com\/products\/starrett-53936-o1-tool-steel-flat-stock-1-32x1-1-4x18-in","provider":"Voomi Supply","version":"1.0","type":"link"}